For US closets, built-in wardrobe walls and dressing rooms, choose cabinet hardware by door height, drawer weight, center-to-center hole spacing, projection and finish approval before ordering. Capramont & Co helps designers, cabinet shops and millwork teams specify British-made cabinet hardware with samples, US Letter spec sheets, project review and Hardware Schedule support.
For US walk-in closets, dressing rooms and built-in wardrobe walls, specify hardware by door height, drawer weight, center-to-center spacing, projection, finish approval and room-by-room schedule control. The hardware choice should start with the closet elevation, drawer layout and drilling plan before a cabinet shop drills drawer fronts, door rails, stiles or appliance-style panels.
Use long pulls on full-height closet doors when the elevation needs a calm repeated line and a secure everyday grip.
Confirm center-to-center dimensions before drilling, especially on replacement fronts, face-frame cabinetry and custom millwork.
Review the finish under bedroom lighting, mirror reflections, painted cabinetry, timber, stone and fabric before production.
A US closet package often includes several cabinet conditions in one room: tall doors, drawer fronts, closet islands, slab panels, mirrored fronts and secondary storage. Keep the finish family consistent, then change the hardware scale by use.
| US application | Best hardware route | Specification check | Action |
|---|---|---|---|
| Full-height closet or wardrobe doors | Long cabinet pulls | Confirm door height, pull length, projection and center-to-center spacing before drilling. | View Hardware Finder |
| Built-in wardrobe banks | Long pulls or discreet C pulls | Keep the main vertical pull line consistent across repeated doors. | Send Project Details |
| Dressing-room drawer fronts | Short pulls, knobs or T-bars | Scale down from the closet doors while keeping the finish and collection logic clear. | Choose Samples |
| Closet islands | Pulls or knobs | Check drawer width, hand clearance and repeat spacing on every face. | Order Finish Sample |
| Slab, fluted or ribbed wardrobe fronts | C pulls or restrained long pulls | Review grip clearance, projection and fixing position before production. | Project & Drawing Review |
| Inset, face-frame or full-overlay cabinetry | Pulls selected by door and drawer construction | Check stile width, overlay, reveal, projection and the fixing screw path. | Projection & Clearance Guide |
The visible length of a pull sets the proportion, but the center-to-center measurement controls the drilling. For replacement doors or made-to-order fronts, measure the fixing holes first and confirm whether the project needs standard centers or custom center review.
Choose the visual pull length first, then confirm the center-to-center size, projection and mounting position against the elevation.
Measure the existing hole spacing, not only the old handle length. If the new pull does not match, use project review before redrilling or changing the hardware route.
| Hardware type | Best US closet use | Watch point |
|---|---|---|
| Long pull | Full-height closet doors, wardrobe walls and tall millwork panels. | Confirm center-to-center spacing, door thickness and vertical line before release. |
| Short or medium pull | Drawer packs, closet islands, dressing tables and smaller doors. | Keep alignment consistent across each drawer bank. |
| C pull | Minimal slab fronts, fluted doors and discreet dressing-room cabinetry. | Check finger clearance and fixing position carefully. |
| Knob | Internal drawers, small doors and supporting details. | Avoid undersized grips on heavy full-height doors. |
| T-bar | Small drawers, secondary cabinetry and decorative storage. | Use as a supporting detail, not the main tall-door pull. |
Use these product pages for visible imagery, overall length, center-to-center sizing and US Letter spec sheets where available. Confirm finish samples and project quantities before made-to-order production.
A classic long pull for full-height closet doors, built-in wardrobe walls and dressing-room storage where the handle line needs to feel calm and repeated.
Center-to-center: 4.2, 5.7, 6.9, 9.7, 12.0, 14.8, 24.3 in / 106, 146, 176, 246, 306, 376, 616 mm
Overall length: 6.7, 8.3, 9.4, 12.2, 14.6, 17.7, 27.2 in / 170, 210, 240, 310, 370, 450, 690 mm
A long-pull route for built-in closets, bedroom storage and dressing-room cabinetry, including a 12.7 in / 322 mm center-to-center option.
Center-to-center: 3.3, 4.9, 5.3, 8.0, 10.4, 12.7, 22.1 in / 84, 124, 134, 204, 264, 322, 562 mm
Overall length: 6.7, 8.3, 9.4, 12.2, 14.6, 17.7, 27.2 in / 170, 210, 240, 310, 370, 450, 690 mm
A balanced long pull for closet banks, wardrobe runs and larger drawer or door fronts where a strong vertical line is needed.
Center-to-center: 3.9, 5.4, 6.6, 9.4, 11.7, 14.2, 23.6 in / 98, 138, 168, 238, 298, 360, 600 mm
Overall length: 6.7, 8.3, 9.4, 12.2, 14.6, 17.7, 27.2 in / 170, 210, 240, 310, 370, 450, 690 mm
A slimmer long-pull route for refined closet walls, dressing rooms and custom cabinetry where the hardware should read quietly but precisely.
Center-to-center: 3.1, 4.6, 5.1, 7.9, 10.2, 12.5, 22.0 in / 78, 118, 130, 200, 260, 318, 558 mm
Overall length: 6.7, 8.3, 9.4, 12.2, 14.6, 17.7, 27.2 in / 170, 210, 240, 310, 370, 450, 690 mm
A long-pull option for bedroom cabinetry, closet walls and dressing-room storage where multiple pull lengths need to stay in one design family.
Center-to-center: 3.5, 5.0, 5.5, 8.3, 10.6, 13.0, 22.4 in / 88, 128, 140, 210, 270, 330, 570 mm
Overall length: 6.7, 8.3, 9.4, 12.2, 14.6, 17.7, 27.2 in / 170, 210, 240, 310, 370, 450, 690 mm
A contemporary pull for slab fronts, closet drawers, wardrobe doors and full-overlay cabinetry where a cleaner hardware line is required.
Center-to-center: 3.6, 4.9, 6.1, 8.7, 11.2, 14.3 in / 92, 124, 156, 220, 284, 364 mm
Overall length: 4.2, 5.5, 6.7, 9.3, 11.8, 14.9 in / 107, 139, 171, 235, 299, 379 mm
A refined pull for dressing-room drawers, closet islands and feature wardrobe cabinetry with an Art Deco-influenced line.
Center-to-center: 3.6, 4.9, 6.1, 8.7, 11.2, 14.3 in / 92, 124, 156, 220, 284, 364 mm
Overall length: 4.5, 5.7, 7.0, 9.5, 12.0, 15.4 in / 114, 146, 178, 242, 306, 392 mm
A discreet C pull for slab closet fronts, fluted panels, ribbed doors and minimal dressing-room cabinetry where low visual weight matters.
Center-to-center: 1.3, 1.8, 2.3 in / 32, 46, 58 mm
Overall length: 1.7, 2.3, 2.8 in / 44, 58, 70 mm
A discreet C-pull route for dressing rooms, home bars, closet drawers and refined slab-front cabinetry.
Center-to-center: 1.3, 1.8, 2.3 in / 32, 46, 58 mm
Overall length: 1.7, 2.3, 2.8 in / 44, 58, 70 mm
Dressing rooms create mixed lighting: warm lamps, mirrors, painted cabinetry, fabric, stone, timber and closet interiors. A physical sample helps the designer, client, cabinet shop and builder agree the finish before the hardware is made.
Use a sample route when comparing aged brass, bronze, black, satin brass, nickel-look or stainless directions.
Use the Finish Sign-Off Knob when the client or project team needs physical approval before production.
Use product samples when a closet door, drawer or island needs a physical scale and hand-feel check.
Use a project sample route when a studio, cabinet shop or client team needs a structured review process.
Samples may be enough for one simple closet bank. Use project review when there are elevations, replacement hole spacings, varied room quantities, builder questions or a client approval route. Use a Hardware Schedule when the package spans several rooms.
| What the US team has | Why it matters | Best route |
|---|---|---|
| Closet elevations or cabinet shop drawings | Confirms door height, drawer layout, pull length and fixing position. | Project & Drawing Review |
| Existing hole spacing | Checks whether replacement pulls can use the existing drilled centers. | Center-to-Center Guide |
| Multi-room cabinetry | Controls products, finishes, sizes, quantities, rooms and approvals in one record. | Start a Hardware Schedule |
| Finish or material uncertainty | Reduces mismatch risk before made-to-order production. | Finish Sign-Off Sample |
| Interior designer, architect, builder or cabinet shop review | Gives the project team a clear product, sample and submittal route. | Trade Access |
Long pulls usually work best because they give a secure grip and create a consistent vertical line. The best length depends on door height, panel construction, projection and the visual rhythm across the closet bank.
Full-height closet and wardrobe doors usually use vertical pulls, while drawer fronts and closet islands often use horizontal pulls. Confirm the line on the elevation before drilling so the finished room reads as one controlled hardware scheme.
Center-to-center is the distance between the two fixing holes on a pull. It matters for drilling, replacement hardware and cabinet shop coordination. Always measure hole spacing before choosing a replacement pull.
Yes. Send elevations, door counts, drawer counts, existing hole spacing, preferred products, finish direction and project timing. Larger closet, dressing-room or whole-home packages can move into a Hardware Schedule.
A finish sample is strongly recommended when the hardware will repeat across a closet bank or dressing room. Mirrors, warm lighting, painted cabinetry and fabric can change how brass, bronze, black, nickel-look and stainless finishes read.
Use a Hardware Schedule when the project includes multiple rooms, varied product sizes, finish approvals, phased ordering, revisions or several approving parties. It gives the team one controlled record for product, finish, size and quantity decisions.