Eccleston Cabinet Knob
Use for smaller vanity doors, shallow drawers and framed fronts where a compact Art Deco knob keeps the layout controlled.
1.0 / 1.2 / 1.5 in knobs
25 / 31 / 38 mm
Bathroom room tag
US Bathroom Vanity Cabinet Hardware Guide | Capramont & Co
For US bathroom vanity projects, choose cabinet hardware by drawer width, door style, center-to-center spacing, grip clearance and finish approval before ordering. Capramont & Co helps designers, builders, cabinet shops and millwork teams specify British-made cabinet knobs, cup pulls and cabinet pulls using samples, US Letter spec sheets, project review and Hardware Schedule support.
US bathroom vanity planning
Start with the cabinet construction, then choose the pull, knob or cup pull
US vanity hardware needs to work with face-frame, inset or full-overlay cabinetry, drawer fronts, door rails and stiles, stone tops, faucets, mirrors and wet-hand use. Confirm the hardware type, center-to-center size, projection, grip clearance and finish sample before ordering.
US vanity checks before release
- Face-frame, inset and full-overlay cabinet construction affect placement and clearance.
- Drawer width, door rails and stiles control whether a knob, cup pull or cabinet pull looks balanced.
- Center-to-center hole spacing should be confirmed before any drilling or replacement order.
- Finish approval should happen against faucets, stone, tile, mirror frames and bathroom lighting.
Door and drawer decisions
Match the hardware route to each vanity zone
A powder room vanity, double sink vanity, linen cabinet and nearby laundry or mudroom cabinet may share one finish, but they do not always need the same hardware type or size.
| US cabinet area | Best hardware route | Specification check | Recommended route |
|---|---|---|---|
| Small vanity door or shallow drawer | Cabinet knob or small cup pull | Check the rail, stile and drawer-front proportions so the hardware does not crowd the face frame. | Review knob route |
| Wide vanity drawer below a sink | Cup pull, cabinet pull or paired knobs | Confirm center-to-center size, hole spacing and symmetry before drilling. | Review cup pull route |
| Tall linen cabinet or closet-style bath storage | Vertical pull handle | Check projection, towel clearance, hand clearance and adjacent door swing. | Review pull route |
| Inset bathroom cabinetry | Knobs, cup pulls or measured cabinet pulls | Confirm door gaps, drawer-box clearance and whether the pull sits cleanly inside the frame. | Send drawings for review |
| Full-overlay vanity fronts | Pull handle or balanced knob placement | Confirm edge clearance, reveal lines and whether the front is slab, Shaker or beaded. | Use Hardware Finder |
| Bathroom plus laundry, mudroom or whole-home cabinetry | Coordinated hardware schedule | Use one record for rooms, products, finishes, quantities, approvals and later reorders. | Start a Hardware Schedule |
| Appliance or refrigerator panels in the same project package | Separate appliance-pull review | Do not scale a vanity pull up by guesswork; confirm panel weight, fixing and pull length separately. | Review appliance pull route |
Center-to-center and clearance
Measure hole spacing, grip and projection before the order is approved
Bathroom cabinet hardware is often installed on small fronts near sink bowls, countertop overhangs, mirrors and towels. That makes the center-to-center measurement and projection check as important as the finish.
Center-to-center
For cabinet pulls and cup pulls, center-to-center means the distance between fixing holes. Existing holes should be measured before choosing a replacement size.
Projection and grip
Check how far the hardware projects from the drawer or door, especially where towels, narrow walkways or adjacent cabinet fronts are close.
Inset and face-frame fit
Inset and face-frame cabinetry can make clearances tighter. Send drawings if the reveal, rail or stile leaves little room for error.
| Measurement point | Why it matters on a vanity | US specification action |
|---|---|---|
| Center-to-center | Controls whether a pull fits drilled holes and whether the scale suits the drawer front. | Record the measurement as inches first with mm included where needed. |
| Hole spacing | Replacement vanity fronts can be difficult to repair if the wrong pull size is drilled. | Use the replacement or project review route before release. |
| Projection | Projection affects towel clearance, walkway clearance and hand comfort. | Review the PDP and US Letter spec sheet where available. |
| Door rails and stiles | Knob and pull placement must respect frame width and panel proportions. | Mark the intended placement on elevations or drawings before ordering. |
| Drawer-front height | Shallow drawers can look crowded if the hardware is too large or too low. | Use a physical product sample where scale or grip is uncertain. |
Finish approval in bathroom light
Approve the finish beside faucets, stone, tile and mirrors
A bathroom finish can read warmer, cooler, darker or brighter beside polished chrome, nickel, brass, marble, porcelain, painted cabinetry and mirror glass. Use a physical finish sample before made-to-order production.
Powder room or guest bath
Compare the finish sample against the vanity color, faucet finish and wall lighting before the hardware schedule is approved.
Primary bath or high-use bath
Review finish behavior and care guidance where the vanity will be used daily and cleaned often.
Coastal or high-humidity project
Send project details before final material or finish selection where humidity, ventilation or coastal conditions are unusual.
| Bathroom condition | Finish approval action | Capramont route |
|---|---|---|
| Matching faucets, lighting and mirror frames | Review the finish physically in the actual room palette, not just on screen. | Finish & Cabinet Color Matching |
| Stone, marble or porcelain nearby | Check contrast, warmth and surface character against the actual material sample. | View product page |
| Client sign-off before ordering | Use a finish sign-off sample before the made-to-order production decision. | View product page |
| Multiple bathrooms or whole-home cabinetry | Keep product, finish, room and quantity decisions inside a Hardware Schedule. | Start a Hardware Schedule |
US product proof
Vanity-ready product routes with US Letter spec sheets
Use these bathroom-tagged Eccleston and Burlington products as the first PDP proof set. They give US designers, builders, architects, cabinet shops and millwork teams product-page proof and US Letter documentation where verified.
Eccleston Cup
Use for traditional vanity drawers, inset fronts and furniture-style bathroom cabinetry where hand grip and symmetry matter.
2.0–5.4 in centers
50–138 mm centers
US Letter spec
Burlington Cabinet Knob
Use where the vanity calls for a stepped, tailored knob with classic, Art Deco or transitional cabinetry details.
1.0 / 1.2 / 1.5 in knobs
25 / 31 / 38 mm
Bathroom room tag
Burlington Cabinet Handle
Use for wide vanity drawers, tall bath storage and coordinated whole-home packages that need a stronger cabinet pull.
3.6–23.8 in centers
92–604 mm centers
US Letter spec
| Product route | US vanity use | Visible proof available | Action |
|---|---|---|---|
| Eccleston Cabinet Knob | Small vanity doors, shallow drawer fronts and framed bath cabinetry. | 1.0 / 1.2 / 1.5 in knobs (25 / 31 / 38 mm), PDP imagery and verified US Letter spec sheet. | PDP / US Letter spec sheet |
| Eccleston Cup | Traditional drawers, furniture-style vanities and inset cabinet fronts. | 2.0 / 3.4 / 5.4 in centers (50 / 86 / 138 mm), PDP imagery and verified US Letter spec sheet. | PDP / US Letter spec sheet |
| Burlington Cabinet Knob | Classic, Art Deco or transitional vanities with tailored detailing. | 1.0 / 1.2 / 1.5 in knobs (25 / 31 / 38 mm), PDP imagery and verified US Letter spec sheet. | PDP / US Letter spec sheet |
| Burlington Cabinet Handle | Wide vanity drawers, tall linen cabinets and coordinated cabinetry packages. | 3.6–23.8 in / 92–604 mm center-to-center route, PDP imagery and verified US Letter spec sheet. | PDP / US Letter spec sheet |
The US Letter spec sheet links above are used only where verified in the Shopify product export. Use the PDP and project review route if a wider room package, unusual cabinet construction or custom millwork detail needs checking.
Submittal and schedule workflow
Send the vanity package before final drilling or sign-off
For US projects, Capramont can review bathroom vanity drawings, elevations, drawer widths, center-to-center requirements, finish direction and product shortlists before the hardware is released for made-to-order production.
| What to send | Why it helps | Best route |
|---|---|---|
| Vanity elevation or cabinet drawing | Confirms drawer widths, door rails, stiles and placement before drilling. | Project & Drawing Review |
| Finish short list and faucet / stone references | Supports finish sample approval against the real bathroom palette. | View product page |
| Room list for bath, closet, laundry and mudroom cabinetry | Keeps whole-home hardware consistent without forcing one product everywhere. | Start a Hardware Schedule |
| Existing hole spacing or center-to-center target | Reduces replacement risk when the vanity fronts are already drilled. | Review center-to-center route |
| Submittal or spec pack requirement | Helps designers, builders, architects and cabinet shops keep PDFs, PDPs and approvals together. | Build a Spec Pack |
Heritage Finish Knobs Palette
Use a physical sample route to compare finish tone against bathroom materials.
Finish Sign-Off Knob
Use for final finish approval before made-to-order production.
Essential Handle & Knob Set
Review scale, shape, grip and proportion before the project order.
Studio Projects Sample Box
Use a structured sample route when a designer, builder or project team needs review.
US bathroom hardware FAQs
Short answers before you specify
What is the safest hardware choice for a small bathroom vanity drawer?
A cabinet knob or small cup pull is usually the safer first route because it keeps the drawer front balanced. Check the drawer height, rail position, stile width and grip clearance before drilling.
Should bathroom vanity pulls be specified by center-to-center size?
Yes. Cabinet pulls and cup pulls should be checked by center-to-center spacing because that controls the fixing holes. This is especially important when replacing existing vanity hardware without redrilling.
Can one finish work across a bathroom, closet and laundry room?
Yes, but the product type and size may change by room. Use samples for finish approval and a Hardware Schedule when the same finish needs to run through bath, closet, laundry, mudroom or whole-home cabinetry.
Do US projects need US Letter spec sheets?
US Letter spec sheets are helpful for submittals, cabinet shop review and project records. Where a verified US Letter PDF is available, this page links to it directly from the product proof section.
When should a vanity drawing be sent for review?
Send the drawing when the cabinetry is inset, face-frame, unusually narrow, already drilled, part of a whole-home package or tied to a client approval process before production.