Statement kitchens
Use longer cabinet pulls on wide drawers, cup pulls where a drawer-led look is needed, and knobs where upper doors need a quieter detail.
US Art Deco Cabinet Hardware Guide | Capramont & Co
For US projects, Art Deco cabinet hardware should be selected by cabinetry type, center-to-center spacing, projection, grip clearance and finish approval. Capramont & Co helps interior designers, architects, cabinet shops and millwork teams specify British-made cabinet pulls, knobs and cup pulls with samples, US Letter spec sheets, project review and hardware schedule support.
Specify Art Deco hardware for US cabinetry
Use this route to move from style direction into cabinet construction, center-to-center sizing, projection checks, finish approval and documentation for a US kitchen, bar, closet, bathroom vanity, laundry room, mudroom or whole-home cabinetry package.
Where the style works in US homes
Art Deco hardware suits US projects when the hardware rhythm is controlled across drawer fronts, door rails and stiles, tall panels and repeated cabinetry runs. The strongest result usually comes from one signature profile repeated with discipline.
Home bars and media rooms
Ribbed, grooved and stepped hardware can create a precise line against lacquer, stained timber, stone, mirror and darker cabinetry.
Closet cabinetry
Repeated vertical pulls can create a Deco rhythm across closet doors, dressing areas and built-in storage walls.
Laundry, mudroom and vanity zones
Confirm grip clearance, finish sample approval and material suitability before using a decorative profile in hard-working rooms.
US specification rule: choose the profile first, check cabinet construction second, confirm center-to-center spacing and projection third, then approve the finish with a physical sample before made-to-order production.
Match the hardware to the cabinetry construction
US cabinetry can be face-frame, inset, full-overlay or slab/front-panel led. The hardware choice should be checked against stile width, drawer-front height, appliance panels, refrigerator panels and hand clearance before drilling.
| US cabinetry type | Art Deco hardware approach | Specification check |
|---|---|---|
| Inset cabinetry | Use controlled knobs, pulls or cup pulls so the hardware does not crowd the frame. | Check stile/rail width, projection, finger clearance and exact drilling location. |
| Face-frame cabinetry | Keep the repeated profile aligned with the frame geometry. | Confirm the screw position does not conflict with frame construction or door thickness. |
| Full-overlay cabinetry | Longer pulls can work well when drawer fronts and doors have enough visual field. | Review reveal lines, adjacent clearances and the opening path before production release. |
| Slab or front-panel cabinetry | Use Westbourne, Burlington or Egerton where the front needs a stronger linear detail. | Keep center-to-center sizes consistent across each elevation. |
| Appliance and refrigerator panels | Use stronger pull routes only after checking pull length, projection and fixing strength. | Send drawings or panel details for project review where the pull affects a refrigerator or tall appliance panel. |
Choose the hardware type before the finish
The finish should not carry the full Art Deco effect. Decide whether the project needs a pull, knob, cup pull, C pull or appliance-panel route before choosing brass, bronze, nickel, stainless or black.
| Hardware type | Best US application | Art Deco specification note |
|---|---|---|
| Cabinet pulls | Wide drawers, pantry doors, closet cabinetry, bar cabinetry and tall doors. | Best for a repeated linear rhythm; check 3.6–14.3 in / 92–364 mm or 3.6–23.8 in / 92–604 mm center ranges by product. |
| Cabinet knobs | Upper doors, paired cabinet doors, smaller drawers and secondary rooms. | Use when the room needs Art Deco detail without making every door read as a strong vertical or horizontal line. |
| Cup pulls | Drawer-led kitchens, pantries, bars and furniture-style cabinetry. | Useful when the drawer front should carry a clear horizontal detail with controlled screw spacing. |
| C pulls | Smaller drawers, narrow fronts, media cabinetry and compact built-ins. | Good when a lower-profile Deco detail is needed without a full-length pull. |
| Appliance pulls | Refrigerator panels, freezer panels, tall units and larger custom millwork doors. | Review panel construction, pull force, fixing position and projection before specifying. |
Product shortlist for US Art Deco specifications
Start with Westbourne, Burlington, Egerton and Eccleston when a US project needs Art Deco or Linear Deco direction. Each route gives a different balance of line, ribbing, stepped geometry and softer drawer detail.
Westbourne Cabinet Pull
Clean Linear Deco route for slab fronts, bars, closet doors, wide drawers and repeated custom cabinetry runs.
Burlington Cabinet Handle
Ribbed and grooved choice for shaker-influenced kitchens, inset cabinetry, bars and formal millwork.
Egerton Handle - P1
Stronger stepped geometry for feature drawers, tall doors, home bars, closets and room-defining cabinetry.
Eccleston Cup
Softer drawer-led route for painted cabinetry, panelled furniture-style runs and transitional Deco schemes.
Visible proof links for US submittals
Use these product pages and US Letter spec sheets when checking product type, center-to-center options, overall scale, finish direction and documentation before samples, project review or a hardware schedule.
| Product | US Art Deco use | Size data to check | Proof links |
|---|---|---|---|
| Westbourne Cabinet Pull | Streamlined pull for drawers, closet cabinetry, bars and feature built-ins. | Centers: 3.6–14.3 in / 92–364 mm. Overall: 4.5–15.4 in / 114–392 mm. | View product page / US Letter spec sheet |
| Westbourne C Pull | Compact Deco detail for smaller drawers, narrow fronts and lower-profile cabinetry. | Centers: 1.3–2.3 in / 32–58 mm. Overall: 1.7–2.8 in / 44–70 mm. | View product page / US Letter spec sheet |
| Burlington Cabinet Handle | Ribbed and grooved route for shaker, face-frame, inset and fluted cabinetry. | Centers: 3.6–23.8 in / 92–604 mm. Check overall length on the product page and spec sheet. | View product page / US Letter spec sheet |
| Burlington Cabinet Knob | Ribbed Deco knob for upper doors, smaller drawers and paired cabinet doors. | Solid-brass knob sizes from about 1.0–1.5 in / 25–38 mm diameter. | View product page / US Letter spec sheet |
| Egerton Handle - P1 | Stepped Deco pull for statement drawer banks, tall doors and formal millwork. | Centers: 3.6–23.8 in / 92–604 mm. Overall: 4.1–24.5 in / 104–622 mm. | View product page / US Letter spec sheet |
| Egerton Handle - P2 | Stronger architectural pull for larger fronts and higher-impact elevations. | Centers: 3.6–23.8 in / 92–604 mm. Overall: 4.6–24.7 in / 116–628 mm. | View product page / US Letter spec sheet |
| Egerton Handle with Baseplate - P1B | Baseplate route where the hardware needs extra visual weight or stronger presence. | Centers: 3.6–23.8 in / 92–604 mm. Confirm plate scale on the product page. | View product page / US Letter spec sheet |
| Egerton Cup | Drawer-led stepped Deco cup pull for kitchens, bars and furniture-style cabinetry. | Centers: 2.0, 3.4, 5.4 in / 50, 86, 138 mm. Overall: 2.4, 3.8, 5.8 in / 60, 96, 148 mm. | View product page / US Letter spec sheet |
| Egerton Cabinet Knob | Coordinated geometric knob for doors, smaller drawers and secondary rooms. | Solid-brass knob sizes from about 1.0–1.5 in / 25–38 mm diameter. | View product page / US Letter spec sheet |
| Eccleston Cup | Softer classic Deco drawer route for transitional kitchens and panelled built-ins. | Centers: 2.0, 3.4, 5.4 in / 50, 86, 138 mm. Overall: 2.4, 3.8, 5.8 in / 60, 96, 148 mm. | View product page / US Letter spec sheet |
| Eccleston Cabinet Knob | Quieter stepped knob for upper doors and smaller-scale Deco details. | Solid-brass knob sizes from about 1.0–1.5 in / 25–38 mm diameter. | View product page / US Letter spec sheet |
Center-to-center, projection and grip checks
Art Deco cabinet hardware often has a stronger profile than plain hardware. For US custom cabinetry and millwork, check hole spacing, projection and hand clearance before ordering or approving a submittal.
| Check | Why it matters | Best next step |
|---|---|---|
| Center-to-center spacing | Replacement projects must align with existing holes; new cabinetry should avoid unnecessary size changes across one elevation. | Use the center-to-center matrix or send existing hole measurements for review. |
| Projection | Stepped and ribbed hardware must clear neighboring doors, inset frames, appliance panels and tight walkways. | Confirm projection on the product page and use project review when the opening path is tight. |
| Grip clearance | Drawer banks, refrigerator panels and tall doors need comfortable hand clearance, not only visual alignment. | Check front thickness, hand position and whether the route needs a longer pull. |
| Door rails and stiles | On inset and face-frame cabinetry, screw positions need enough material and a balanced visual relationship with the frame. | Confirm drilling positions before finish approval and schedule release. |
Finish approval before made-to-order production
Art Deco hardware can read very differently in warm brass, bronze, nickel, stainless or black. Approve finish direction against cabinetry color, stone, appliance finish, lighting and room use before placing the made-to-order hardware order.
| Finish direction | US project use | Approval note |
|---|---|---|
| Warm brass and aged brass | Classic Art Deco warmth for kitchens, bars, dining cabinetry and dressing areas. | Compare against cabinet color, stone veining and lighting before approving the finish. |
| Bronze and darker brass | Quieter metal direction for walnut, dark cabinetry and richer room palettes. | Use a physical finish sample where the project needs depth without high contrast. |
| Nickel or stainless direction | Cooler Streamline Moderne effect for bathrooms, bars, modern kitchens and stone-led schemes. | Check finish tone against appliance finishes, faucets and lighting color temperature. |
| Black or dark contrast | Graphic line for pale cabinetry, slab fronts, media rooms and higher-contrast Art Deco styling. | Confirm the hardware should read as a deliberate drawn outline across the cabinetry. |
Sample routes for US product and finish approval
Use physical samples when the project team needs to check finish tone, metal direction, grip, scale or client approval before made-to-order hardware is released.
Finish Sign-Off Knob
Use for finish approval against cabinet color, stone, appliances and room lighting.
View product pageHeritage Finish Knobs Palette
Use when comparing aged brass, bronze, black, satin brass and stainless directions.
View product pageEssential Handle & Knob Set
Use when the team needs to compare physical grip, scale and profile before selection.
View product pageStudio Projects Sample Box
Use when a designer, architect, builder, cabinet shop or client team needs a structured review route.
View product pageUS documentation and schedule workflow
For a US submittal or internal studio pack, keep the product page, US Letter spec sheet, finish sample, drawing notes and hardware schedule aligned before product release.
| Workflow item | What to include | Capramont route |
|---|---|---|
| Product shortlist | Product names, handles, sizes, center-to-center spacing and rooms. | Use product pages and the Hardware Finder. |
| US Letter spec sheets | Visible PDF proof for products selected in the schedule or client pack. | Use the US Letter spec sheet links above where available. |
| Finish approval | Finish sample, cabinet color, stone, appliance finish and lighting notes. | Use Finish Sign-Off Sample or sample set routes. |
| Drawing review | Elevations, door/drawer counts, appliance panels, existing hole spacing and custom center requirements. | Use project review before final order release. |
| Hardware Schedule | One controlled record for product, finish, size, centers, quantities, rooms and approvals. | Start a Hardware Schedule for multi-room or whole-home work. |
Send the project when the hardware affects more than one room
Use project review when the Art Deco hardware decision affects whole-home cabinetry, a kitchen and pantry, closets, bathroom vanities, appliance panels, custom center spacing, finish approvals or a trade/project account route.
Project enquiry route
Use this when the project has drawings, room notes, product shortlists, existing holes or proposed finish directions.
Send Project DetailsHardware Schedule route
Use this when a designer, architect, builder or cabinet shop needs one controlled record for approvals.
Start a Hardware ScheduleTrade/project route
Use this after product fit is clear and the buyer needs trade/project account support.
Apply for Trade AccessArt Deco hardware questions from US specifiers
What cabinet hardware works best for US Art Deco kitchens?
Use cabinet pulls, cup pulls and knobs with stepped, ribbed, grooved or linear geometry. The best choice depends on drawer-front width, door style, center-to-center spacing, projection and whether the cabinetry is inset, face-frame, full-overlay or slab-front.
Should I choose the finish or the hardware profile first?
Choose the hardware profile first, then approve the finish. Art Deco styling depends on proportion, repeated geometry and placement, so the profile must work with the cabinet layout before the finish sample is selected.
Do replacement pulls need the same center-to-center spacing?
Yes, replacement pulls should match existing hole spacing unless the fronts will be repaired or replaced. Measure from screw center to screw center, then compare against the product page and US Letter spec sheet before ordering.
Can Capramont support a US Art Deco hardware schedule?
Yes. Capramont can support product choice, sizes, center-to-center spacing, finishes, rooms, quantities, US Letter spec sheets, sample approval and project review through a hardware schedule route for US projects.