Choose Georgian and Regency cabinet hardware for US kitchens, pantries, closets, appliance panels and custom cabinetry by checking style, pull size, finish, projection and repeatability before ordering. Capramont & Co supports US projects with British-made hardware, samples, finish sign-off and project review.
US specification route
For US Georgian and Regency projects, the right cabinet pull or knob depends on the cabinet construction, drawer width, center-to-center spacing, projection, grip clearance and finish approval route.
Cabinet construction
A classical pull can look balanced on one cabinet face and too heavy on another. Start with the way the cabinetry is built, then confirm the hardware size, mounting centers and finish.
| US cabinetry type | Best hardware route | Specification check |
|---|---|---|
| Inset cabinetry | Knobs on doors; cabinet pulls or cup pulls on wider drawers. | Check rail and stile width, centered positions, grip clearance and projection before drilling. |
| Face-frame cabinetry | Compact knobs, measured pulls and cup pulls that do not crowd the frame. | Confirm screw location against the face frame, drawer box and reveal. |
| Full-overlay cabinetry | Cleaner classical pulls where the hardware scale is restrained. | Check door swing, adjacent fronts, edge clearance and appliance-panel conflict. |
| Slab or flat drawer fronts | Classical pulls used sparingly to add order without excess decoration. | Confirm pull length against drawer width and repeat the finish across the run. |
| Appliance or refrigerator panels | Longer pulls only where scale, fixing strength and grip require it. | Review panel thickness, fixing method, projection and adjacent clearance before ordering. |
US home applications
The hardware should support the cabinetry architecture rather than become the loudest element in the room. Use one controlled finish family and repeat the same sizing logic across related spaces.
01 / Kitchens
Use balanced knobs, cup pulls and classically proportioned cabinet pulls where doors and drawer fronts have rails, stiles, panel detail or traditional moldings.
02 / Pantries and bars
Repeat one finish and limit the number of hardware forms so a pantry, bar or butler’s pantry does not become visually busy.
03 / Closets
Use longer pulls where doors are taller, but confirm that the pull does not overpower the cabinet face or interrupt adjacent doors.
04 / Laundry rooms
Choose hardware with enough grip for daily use while keeping the finish consistent with the kitchen or whole-home palette.
05 / Mudrooms
Check projection and finish suitability where bags, coats and daily traffic may contact the hardware.
06 / Whole-home millwork
For multi-room custom cabinetry, use a Hardware Schedule to control products, sizes, centers, finishes and quantities.
Hardware type decision
A US Georgian or Regency scheme usually works best with a controlled mix rather than one product type everywhere.
| Hardware type | Best use in a US Georgian / Regency project | Risk to avoid |
|---|---|---|
| Cabinet knobs | Doors, small drawers, furniture-style cabinetry and quieter elevations. | Do not under-size knobs on large doors where grip becomes awkward. |
| Cabinet pulls | Wider drawers, larger doors, closets, pantry cabinetry and whole-home millwork. | Do not choose a pull only by style; check center-to-center spacing and projection. |
| Cup pulls | Drawer banks, pantry drawers, laundry rooms and traditional painted cabinetry. | Do not use cup pulls where the hand angle or drawer height makes them uncomfortable. |
| T-bars | Compact drawer or door positions where a knob feels too small. | Do not mix too many small hardware forms across one elevation. |
| Appliance pulls | Refrigerator panels, freezer panels and tall integrated doors where fixing strength is suitable. | Do not specify long pulls without checking panel construction and appliance clearances. |
Mounting checks
For replacement work, existing hole spacing may decide the available pull route. For new custom cabinetry, confirm pull size before the cabinet shop drills doors and drawer fronts.
Approval checklist
| Check | Why it matters |
|---|---|
| Hole spacing | Prevents center-to-center errors on new or replacement drawer fronts. |
| Projection | Protects appliance, corner and adjacent-door clearance. |
| Grip | Confirms the hardware works in daily use, not only in elevation drawings. |
| Finish sample | Checks the metal against paint, stone, timber and lighting before production. |
| Hardware Schedule | Keeps rooms, quantities, centers, finishes and approvals in one record. |
Finish approval
A Georgian or Regency hardware route depends heavily on finish restraint. Use a sample against the actual cabinet color, countertop, backsplash, flooring and lighting before made-to-order production.
| Cabinet / room direction | Finish route to test | Approval note for US projects |
|---|---|---|
| Warm white or cream cabinetry | Aged Brass, Fine English Antique Brass, Medium Bronze or Satin Brass. | Check the sample against both daylight and evening lighting. |
| Formal painted kitchen | Aged Brass, antique brass or bronze-led finishes. | Keep contrast controlled so the hardware supports the cabinetry rather than leading the room. |
| Regency-inspired millwork | Warm brass, bronze or restrained darker finishes. | Use fewer finish changes across the space to keep the scheme calm. |
| Dark timber or deep painted fronts | Aged Brass, Fine English Antique Brass, Dark Bronze or Satin Nickel. | Confirm whether the hardware should contrast or sit quietly into the cabinetry. |
| Laundry room, mudroom or pantry | Practical Heritage finishes with enough grip for repeated use. | Check wear expectations, hand contact and finish approval before final order release. |
US product shortlist
Use the product page for live options and the US Letter spec sheet for project documentation, submittal packs and cabinet shop review.
Use Varndell where the room needs a traditional pull with clear proportion for inset kitchens, pantry cabinetry or formal drawer banks.
Centers: 3.5, 5.0, 5.5, 8.3, 10.6, 13.0, 22.4 in / 88, 128, 140, 210, 270, 330, 570 mm.
Lengths: 6.7–27.2 in / 170–690 mm.
Use Manresa where the cabinetry needs a slimmer, more refined pull without losing classical order or finish restraint.
Centers: 3.9, 5.4, 6.6, 9.4, 11.7, 14.2, 23.6 in / 98, 138, 168, 238, 298, 360, 600 mm.
Lengths: 6.7–27.2 in / 170–690 mm.
Use Harrington where the cabinetry needs a stronger heritage feel across kitchen drawers, pantry runs or formal millwork.
Centers: 4.2, 5.7, 6.9, 9.7, 12.0, 14.8, 24.3 in / 106, 146, 176, 246, 306, 376, 616 mm.
Lengths: 6.7–27.2 in / 170–690 mm.
Use Varndell knobs where cabinet doors, furniture pieces or smaller drawer fronts need a restrained period detail.
Diameter class: 1.0 in / 25 mm.
Best use: doors, smaller drawers and furniture-style cabinetry.
Use Brunswick where the project has traditional references but needs a straighter, more contemporary cabinet pull.
Centers: 6.2, 7.8, 8.9, 11.6, 14.0, 17.1, 26.6 in / 158, 198, 225, 295, 355, 435, 675 mm.
Lengths: 6.7–27.2 in / 170–690 mm.
Use Farringdon Cup where drawer banks need a traditional pull shape with a familiar period-cabinetry character.
Centers: 2.0, 3.4, 5.4 in / 50, 86, 138 mm.
Lengths: 2.4, 3.8, 5.8 in / 60, 96, 148 mm.
US documentation
For US designers, architects, builders, cabinet shops and millwork teams, the specification route should make product review easier before drilling, approval or production release.
| Document or detail | Why it helps | Best route |
|---|---|---|
| US Letter spec sheet | Provides a US document format for product review, submittal packs and project records. | Use the product-card US Letter spec sheet links above. |
| Marked elevations | Shows drawer widths, tall doors, appliance panels and room-by-room placement. | Send Project Details |
| Door and drawer count | Helps build quantities and identify repeated sizes. | Start a Hardware Schedule |
| Existing hole spacing | Essential for replacement projects and center-to-center checks. | Send Project Details |
| Cabinet color and room palette | Helps choose finish samples and avoid approval issues. | Choose Samples |
| Trade or cabinet shop details | Supports project workflow, repeat ordering and account review. | Apply for Trade Access |
Short answers
Most Georgian-style US cabinetry uses a controlled mix: knobs for doors and smaller drawers, with cabinet pulls or cup pulls for wider drawer fronts. The best choice depends on rail width, drawer size, grip and finish consistency.
Center-to-center is the distance between the mounting screw holes on a cabinet pull. For replacement work, it is one of the most important measurements because it decides whether existing holes can be reused.
Yes, but the hardware should usually be cleaner and more restrained than it would be on deeply framed inset cabinetry. Check pull length, projection and visual weight against the larger uninterrupted cabinet face.
Yes for most project-led orders. A finish can read differently against paint, stone, timber, backsplash material and lighting, so physical finish approval is safer than choosing from screen images alone.
Project review
If the project includes appliance panels, tall doors, several rooms, a cabinet shop, a designer, an installer or a client approval route, review the hardware plan before drilling or production release.
US next step
Choose samples if the finish is not approved. Use the Hardware Finder if the product route is still open. Send project details when drawings, quantities, center-to-center checks or a whole-home hardware schedule need review.