Filters
The Varndell Collection is a heritage cabinet pull, T-bar and knob family for American shaker kitchens, inset-style cabinets, pantry rooms, mudrooms, closets, dressing rooms, home bars, club-style millwork and traditional built-ins. Made in England by Capramont & Co, Varndell is designed for projects that need ribbed bullet detail, classical proportion and a more tactile alternative to plain cabinet pulls.
Use this collection to compare Varndell pull centers, overall lengths, T-bar sizes, knob diameters, finish options, replacement fit, interior-use suitability and room-by-room specification control. For live US projects, send cabinet elevations, closet layouts, bar millwork drawings, cabinet counts or existing hole measurements before ordering so the hardware schedule can be checked before production.
Fast specification answer
| Best for | Inset-style shaker kitchens, pantry rooms, mudrooms, closets, dressing rooms, home bars, club millwork and traditional built-ins that need a tactile heritage pull, T-bar and knob schedule. |
| Main products | Varndell Cabinet Pull for drawers, pantry doors, closet millwork and tall fronts. Varndell T-Bar for compact single-hole pull points. Varndell Cabinet Knob for upper cabinets, smaller drawers and furniture-scale details. |
| Key sizes | Pull centers: 88, 128, 140, 210, 270, 330 and 570 mm, approximately 3.46, 5.04, 5.51, 8.27, 10.63, 12.99 and 22.44 inches. T-bars: 56 and 65 mm. Knobs: 25, 31 and 38 mm. |
Varndell cabinet pull specification checks
| Varndell Cabinet Pull | The primary Varndell pull for kitchen drawers, pantry doors, mudroom cabinetry, closet fronts, bar millwork and tall built-ins. Use it where the cabinet elevation needs a round-section pull with ribbed bullet ends rather than a square modern bar. |
| Varndell T-Bar | The compact Varndell pull route for cabinet doors, smaller drawers, closet fronts and bar cabinetry. Use it where a single-hole fixing needs more grip and visual direction than a cabinet knob. |
| Varndell Cabinet Knob | The matching Varndell knob for upper cabinets, smaller drawers, closet doors, pantry fronts and furniture pieces. Use it where a full pull would feel too long or where the millwork needs a quieter single-point fixing. |
Before selecting sizes
| Cabinet style | Varndell suits inset-style shaker, paneled, beaded and traditional fitted cabinetry. It works best where pulls, T-bars and knobs should feel tactile, classical and substantial without becoming ornate. |
| Pull centers | Varndell Cabinet Pulls are available in 88, 128, 140, 210, 270, 330 and 570 mm center-to-center sizes. These convert approximately to 3.46, 5.04, 5.51, 8.27, 10.63, 12.99 and 22.44 inches. |
| Overall length | Overall Varndell pull lengths are 170, 210, 240, 310, 370, 450 and 690 mm, approximately 6.69, 8.27, 9.45, 12.20, 14.57, 17.72 and 27.17 inches. Always drill from the confirmed center-to-center size. |
| T-bars and knobs | Varndell T-Bars are available in 56 and 65 mm lengths, approximately 2.20 and 2.56 inches. Varndell Cabinet Knobs are available in 25, 31 and 38 mm diameters, approximately 0.98, 1.22 and 1.50 inches. |
| Finish approval | Confirm finish against cabinetry, stone, tile, appliances, lighting and plumbing finishes before production. Heritage finishes cover the main brass, bronze, black and satin stainless routes; selected Atelier options can support carbon-coated stainless steel and titanium directions. |
Project proof and replacement checks
| US measurement note | Use inch conversions for early planning, but confirm the final drilling size in millimeters before ordering. This protects designers, cabinetmakers, millwork shops and installers from center-to-center errors. |
| Replacement use | For replacement cabinet pulls, measure the existing hole spacing first. Varndell pull centers are 88, 128, 140, 210, 270, 330 and 570 mm, so old holes should be checked before any new door or drawer front is drilled. |
| Before release | Confirm pull centers, overall lengths, T-bar lengths, knob diameters, projection, cabinet thickness, finish samples, room locations, quantities and material suitability in the Hardware Schedule before production. |
Varndell product route summary
| Best design fit | Georgian, Neoclassical, Heritage Classic and club-style millwork where the hardware should add ribbed bullet detail, rounded grip geometry and a substantial engineered hand feel. |
| US room use | Kitchens, pantries, mudrooms, closets, dressing rooms, home bars, private clubs, bedroom cabinetry, boutique hospitality millwork and traditional built-in furniture. |
| Best hardware types | Use Varndell Cabinet Pulls for primary drawers, pantry doors, closet millwork and tall fronts. Add Varndell T-Bars for compact grip points and Varndell Cabinet Knobs for uppers, smaller fronts and furniture-scale details. |
| Project control | For multi-room or whole-home projects, align pull centers, T-bar lengths, knob diameters, finish samples, room locations, quantities and material suitability in one Hardware Schedule before production. |
Best-fit US projects
Choose Varndell for high-end shaker kitchens, inset-style cabinetry, pantry rooms, mudrooms, closet systems, dressing rooms, bar cabinetry, club rooms and boutique hospitality millwork where the hardware should feel tactile, heritage-led and intentionally visible.
Varndell is less suitable for plain minimalist schemes, invisible edge pulls, cup pull schedules, soft Scandinavian cabinetry or fully coastal and marine projects without a separate material review. For those directions, compare Hardware Finder routes, Manresa, Harrington, Melbury, Pembridge, Maddox, Lexham, Beaufort or Westbourne before final selection.
Project and finish support
Capramont & Co Varndell cabinet pulls, T-bars and knobs are made in England for project-led interiors. Heritage finishes cover aged brass, Fine English antique brass, dark aged brass, bronze, black, satin brass and satin stainless directions, while selected Atelier options can be reviewed for black carbon-coated stainless steel, silver carbon-coated stainless steel and titanium specifications.
For US projects, confirm whether the schedule is being specified in inches, millimeters or both. Then check center-to-center sizes, overall lengths, T-bar lengths, knob diameters, projection, finish sign-off, interior-use suitability and room quantities before the final order is released. Varndell is designed for interior joinery and should not be assumed suitable for fully coastal or marine specifications.
Related specification routes
Hardware Collections · Varndell Cabinet Pull · Varndell T-Bar · Varndell Cabinet Knob · Hardware Finder · Architectural Styles · USA Specification Center · Materials and Finishes · Finish Sign-Off Sample · Send Project / Drawing Details