Cabinet Hardware Specification System · Project Application
Wardrobe & Dressing Room Cabinet Hardware
For villas, branded residences and fitted wardrobe projects in Saudi Arabia, coordinate hardware across full-height doors, drawer banks and repeated storage zones before fabrication, with metric centres, projection, finish approval and larger Hardware Schedules controlled together.
Made to Order in England · Custom Sizes — No Minimum Order · Finish Approved Before Production · Project Drawing & Hardware Schedule Support
01 · Wardrobe & Dressing Room Zones
Use one design language, then change the scale by function.
Full-height wardrobe doors need confident grip and a calm vertical rhythm. Dressing tables, islands and internal drawers usually need smaller supporting hardware. The finish family can remain consistent while the form and scale change.
| Zone | Hardware direction | What to control | Next route |
|---|---|---|---|
| Full-height wardrobe doors | Long pulls | Door height, leverage, vertical datum, projection and repeated spacing. | Hardware Finder |
| Fitted wardrobe banks | Long pulls or C pulls | Consistent line, centres and visual rhythm across the elevation. | Project Enquiry |
| Dressing-table drawers | Short pulls, knobs or T-bars | Scale down while keeping the collection or finish language coherent. | Finish Palette |
| Wardrobe islands | Pulls or knobs | Drawer width, hand clearance, repeated datum and finish consistency. | Size & Placement |
| Minimal slab / fluted fronts | C pulls or restrained long pulls | Projection, grip and visual weight against the panel treatment. | Projection & Fixings |
| Whole-home bedroom joinery | Coordinated family | Product, size, finish, room, quantity and approval in one schedule. | Whole-Home Schedule |
02 · Product & Design Specification
Plan the vertical rhythm before choosing individual handles.
A wardrobe elevation reads as architecture. Establish the line, proportion and repeated datum first; then choose the hardware form and size that delivers the required grip without adding unnecessary visual weight.
01 · Full-height line
Long pulls for tall doors
Use longer pulls where the elevation needs a stronger vertical line, greater leverage and a comfortable grip position.
Hardware Finder02 · Minimal fronts
C pulls for lower visual weight
Useful on slab, fluted and ribbed fronts where the hardware should remain discreet and close to the cabinetry.
Beaufort C Pull03 · Drawer zones
Scale down without changing language
Use shorter pulls, knobs or T-bars for dressing tables and islands while keeping collection and finish continuity.
Size & Placement04 · Whole room
Repeat a controlled datum
Align pull positions consistently across adjacent doors and drawer banks unless the joinery intentionally changes the datum.
Schedule Guide03 · Sizing, Centres & Fit
Lock the drilling dimensions before wardrobe fronts are committed.
For two-point hardware, centre-to-centre is the drilling dimension. Overall length, projection, usable grip, front thickness and fixing conditions are separate decisions.
Centres
Confirm the selected product’s exact drilling dimension before the cabinet maker drills the front.
Centres MatrixCustom centres
Eligible made-to-order products can be reviewed for bespoke centres where the wardrobe datum or existing holes require them.
Custom CentresProjection & grip
Check hand clearance, adjacent doors, internal returns, mirrors and circulation where the room is compact.
Projection & FixingsInstallation
Confirm front thickness, rear access and screw engagement. Do not infer final screw length from the thread size alone.
Installation & Fitting04 · Tall-Door Engineering
Long pulls must work as well as they look on full-height doors.
The taller and heavier the wardrobe door, the more important leverage, fixing position, grip and projection become. Review the whole elevation rather than treating each pull as an isolated decorative choice.
01
Vertical datum
Set a repeatable fixing position across the wardrobe bank so the hardware line remains calm and intentional.
02
Grip & projection
Check usable hand clearance against adjacent doors, mirrors, corners and circulation before release.
03
Drawing review
Send unusual door build-ups, restricted rear access, custom centres or very large elevations for review before drilling.
05 · Materials & Finish Approval
Approve the hardware beside the actual wardrobe materials and lighting.
Dressing rooms combine timber, veneer, lacquer, fabric, mirrors, stone and artificial lighting. Physical finish approval is more reliable than screen colour, particularly across large repeated wardrobe runs.
Compare the finish family
Use the Heritage Finish Knobs Palette when comparing brass, bronze, black and stainless directions across the room.
Heritage PaletteSign off the final finish
Use a physical sign-off sample beside the actual cabinetry, mirror, stone, timber and room lighting before production.
Finish Sign-Off SampleReview material suitability
Where humidity, heavy handling or specialist material performance matters, compare the Heritage and Performance Metals routes separately from colour.
Materials & Finishes06 · Product Proof
Nine product routes for wardrobes, closets and dressing rooms.
Use the live PDP as the source of truth for current variants. Use the specification sheet for project files and dimensional coordination.
07 · Specification Proof & Project Control
Move from selection to a controlled wardrobe specification.
Use product pages and spec sheets to prove dimensions, a physical sample to approve the finish, drawing review when the joinery condition matters, and a Hardware Schedule when several rooms or repeated wardrobe banks need one controlled record.
Product proof
Use the live PDP plus A4 or US Letter spec sheet for the selected hardware route.
Finish approval
Approve the chosen finish physically under bedroom, dressing-room and mirror lighting.
Drawing review
Send elevations, door counts, existing holes, custom centres and unusual fixing conditions before drilling.
Hardware Schedule
Control room, product, size, centres, finish, quantity, drawing reference and approval status in one record.
08 · Related Specification Routes
Continue from wardrobe planning into the connected engineering and project routes.
These pages keep the wardrobe and dressing-room specification connected to the same product, dimensional, finish and project-control system used across Capramont cabinetry.
Parent systemCabinet Hardware Specification
Return to the four-module Capramont specification method.
HubSpecification CentreSamples, finish sign-off, custom centres, drawing review and project support.
PlacementSize & PlacementPull length, vertical alignment and front balance before fixing.
FitProjection, Grip & FixingsClearance, projection, rear access and fixing conditions.
DimensionsCentres & ReplacementStandard centres, existing drilling and replacement decisions.
BespokeCustom CentresProject-specific centre review for bespoke joinery and existing holes.
FinishMaterials & FinishesHeritage, Performance Metals, physical samples and finish sign-off.
Tall panelsAppliance Pulls & Tall UnitsLong-pull geometry and panel engineering where full-height conditions become more demanding.
CoordinationWhole-Home Hardware ScheduleExtend the wardrobe specification into kitchens, vanities and fitted rooms.
09 · Direct Answers
Wardrobe and dressing-room hardware questions.
What hardware works well on full-height wardrobe doors?
Long pulls are often appropriate where a full-height door needs confident grip, leverage and a clear repeated vertical line. The final size should be checked against the door height, construction, projection and desired visual proportion.
Should every wardrobe door use the same pull length?
Not necessarily. Keep the design and finish language coherent, but scale can change with door height, drawer width and function. A Hardware Schedule helps control those intentional differences.
Can Capramont make custom fixing centres?
Eligible made-to-order products can be reviewed for custom centres where standard drilling does not suit bespoke joinery, an architectural datum or existing holes.
How should I choose hardware for minimal wardrobe fronts?
C pulls or restrained linear pulls can reduce visual weight on slab, fluted or ribbed fronts. Check projection and usable grip before committing the joinery.
Should the finish be approved physically?
Yes. Review the finish beside the actual cabinetry, veneer, mirror, stone and room lighting before made-to-order production, particularly where many repeated doors make small tonal differences more visible.
When should I send wardrobe drawings?
Send drawings when the project has unusual door build-ups, existing holes, custom centres, restricted access, large repeated elevations, several rooms or any condition where the drilling or finish decision remains open.
When should a wardrobe project use a Hardware Schedule?
Use a Hardware Schedule when several products, sizes, centres, finishes, quantities, rooms or approving parties need to be controlled in one project record.
Next Step
Set the wardrobe rhythm, then lock the hardware specification.
Choose the hardware line, confirm scale and centres, check projection and fixing conditions, approve the finish physically and record the final selections before drilling and made-to-order production.