Cabinet Handle Projection & Fixings Guide | Capramont & Co
Cabinet handle projection is the distance hardware stands proud from a door or drawer front; finger clearance is the usable space behind or within the pull. For Capramont & Co hardware, check projection, centres, fixing type and door thickness before drilling, then send project details for custom centres, appliance pulls or unusual joinery.
Technical specification guide
Prevent drilling, clearance and fixing problems before order.
Projection, finger clearance and fixing type should be checked before release to the joiner. This guide helps specifiers decide when a product can be selected from the PDP and tear sheet, and when drawings, door thickness or existing holes should be reviewed by Capramont & Co.
Before drilling
Check the four technical risks.
Projection
How far the hardware stands proud from the cabinet face.
Finger clearance
The usable grip space behind, under or inside the pull.
Fixing
Single-point, two-point, rear-fix, screw length and fixing method.
Door thickness
Front thickness affects screw length, rear access and fitting suitability.
Decision framework
Projection and finger clearance are related, but not the same.
Projection
Projection is the distance from the cabinet face to the furthest outward point of the handle, knob, cup pull, C pull or T-bar.
Finger clearance
Finger clearance is the usable space for fingers behind, under or within the pull. A product can project well but still feel tight if the grip path is shallow.
Fixing suitability
Fixing suitability depends on centres, door thickness, screw length, rear access and whether the product is used on a light door, wide drawer or appliance front.
Hardware type comparison
Clearance and fixing checks by product type
| Hardware type | What to check | Main risk | Best Capramont route |
|---|---|---|---|
| Cabinet handle / pull | Projection, centre-to-centre, hand space behind the bar and repeat alignment across the run. | Looks correct on elevation but feels too shallow in use. | View Hardware Finder or check PDP tear sheet. |
| Appliance / tall-unit pull | Grip strength, projection, door weight, fixing position and whether used vertically or horizontally. | Pull feels undersized for a tall or integrated appliance front. | Send Project Details. |
| C pull / finger pull | Finger recess, rear-fix access, front thickness, edge position and consistent alignment. | Low-profile appearance but tight finger access. | Review Custom Centres or ask from PDP. |
| Cup pull | Internal finger space, drawer height, fixing centres and drawer bank alignment. | Cup appears proportionate but feels cramped on larger drawers. | Check product tear sheet and consider a sample. |
| Cabinet knob | Diameter, projection, single-point fixing, door thickness and visual alignment. | Simple fixing, but small alignment errors repeat visibly. | Order Finish Sign-Off Knob. |
| T-bar | Projection, orientation, single-point fixing and grip comfort on smaller doors/drawers. | Rotation or inconsistent alignment if setting-out is weak. | Check PDP and ask about product if unsure. |
Fitter checklist
Joiner checks before drilling fronts
Confirm the product data
- Product name and collection
- Size option and overall length
- Centre-to-centre measurement
- Projection from cabinet face
- Fixing type and supplied screws
- Door or drawer-front thickness
Confirm the project condition
- Existing holes or new drilling
- Horizontal or vertical orientation
- Slab, shaker, fluted or ribbed fronts
- Appliance or tall-unit loads
- Repeated drawer bank alignment
- Need for custom centres or schedule control
Product proof
Specification proof examples
The products below are proof routes for centres, overall length, fixing notes, PDP images and A4 tear sheets.
Westbourne Cabinet Pull
Beaufort C Pull
Westbourne C Pull
Farringdon Cup
Maddox Cabinet Handle
Specification table
Specification table
| Product | Type | Centres / size route | Projection / clearance action |
|---|---|---|---|
| Beaufort Cabinet Handle | Cabinet handle | 92, 124, 156, 220, 284, 364 mm centres | Confirm projection and grip space on PDP / A4 tear sheet before drilling. |
| Westbourne Cabinet Pull | Cabinet handle | 92, 124, 156, 220, 284, 364 mm centres | Confirm projection and clearance for slab, fluted or slim-frame fronts. |
| Beaufort C Pull | C pull | 32, 46, 58 mm centres | Confirm finger recess and rear access before drilling. |
| Westbourne C Pull | C pull | 32, 46, 58 mm centres | Confirm finger recess, projection and door thickness. |
| Farringdon Cup | Cup pull | 50, 86, 138 mm centres | Confirm internal finger space and drawer height. |
| Brunswick T-Bar | T-Bar | Size option to confirm on PDP | Confirm projection, orientation and repeat alignment. |
| Brunswick Cabinet Knob | Cabinet knob | Size option to confirm on PDP | Confirm projection, grip comfort and door/drawer scale. |
| Harrington Handle | Long pull / handle | 106, 146, 176, 246, 306, 376, 616 mm centres | Confirm suitability for tall doors, wardrobes and appliance-scale fronts. |
Project escalation
When to send drawings, elevations or door details
Send project details where the cabinetry uses appliance panels, tall doors, fluted fronts, slim rails, inset cabinetry, existing holes, unusual door thickness or multiple repeated elevations. A short drawing, door count or photograph can prevent incorrect drilling before made-to-order production.
Related specification assets
Continue specification checks
Specification Guides
Parent route for technical, product and project guidance.
Common Centres / Replacement Matrix
Existing holes, centre-to-centre sizes and replacement logic.
Custom Centres Guide
Non-standard joinery, bespoke sizes and centre review.
Finish & Cabinet Colour Matching
Finish selection by cabinetry colour, material and sample route.
Materials & Finishes
Heritage finishes, material direction and finish family context.
Finish Sign-Off Knob
Physical finish approval route before made-to-order production.
Start a Hardware Schedule
Controlled product, finish, size, quantity and approval record.
Trade Access
Trade/project route for studios, joiners and project-led buyers.
FAQs
Projection, clearance and fixing questions
What is cabinet handle projection?
Cabinet handle projection is the distance the handle, knob or pull stands out from the cabinet front. It matters because it affects grip comfort, visual weight, adjacent-door clearance and whether the hardware is suitable for the door or drawer position.
What is finger clearance?
Finger clearance is the usable space for fingers behind, under or inside the hardware. It is different from projection. A product can project well but still feel tight if the underside, recess or cup shape limits the grip path.
Do all handles need the same projection?
No. Projection depends on hardware type, cabinet style and use case. A small knob, C pull, cup pull, standard handle and appliance pull all behave differently. Always check the PDP or tear sheet before drilling.
When should a project be reviewed before ordering?
Use project review when the hardware is for appliance fronts, tall doors, existing holes, custom fronts, slim rails, fluted fronts, inset cabinetry or multi-room schedules. This helps prevent drilling errors before made-to-order production.