Manresa Cabinet Handle
Classical long-pull route for shaker, in-frame, panelled cabinetry, larders and taller kitchen fronts.
Overall lengths: 170–690 mm. Centres: 98–600 mm.
Luxury Cabinet Hardware for Bespoke Kitchens
Capramont & Co manufactures made-to-order cabinet hardware in England for bespoke kitchens and fitted joinery. Specify cabinet pulls, knobs, T-bars, cup pulls, edge pulls and appliance-scale pulls with custom fixing centres, physical finish approval, drawing review and Hardware Schedule support. Coordinate cabinet and appliance hardware as one controlled specification before the joinery is drilled and production begins.
Bespoke kitchen authority
Made-to-order cabinet hardware for the complete bespoke kitchen.
Capramont & Co manufactures cabinet hardware in England for professionally designed bespoke kitchens and fitted joinery. Specify cabinet handles, knobs, T-bars, cup pulls, C pulls and longer appliance-scale pulls as one coordinated hardware package rather than a series of isolated product choices.
Use this page when the kitchen needs controlled product selection, fixing centres, overall dimensions, projection, physical finish approval, drawing review or one Hardware Schedule before made-to-order production.
Complete kitchen
Specify the hardware across the whole kitchen, not one cabinet at a time.
A high-value kitchen typically combines several cabinet types and several hardware scales. Start with the joinery and function, then choose the hardware type, size, centres and finish that keep the entire room visually and technically coordinated.
| Kitchen area | Typical hardware route | What to control |
|---|---|---|
| Cabinet doors | Knobs, T-bars or pull handles. | Door style, rail/stile position, grip, projection and fixing position. |
| Drawer fronts | Pull handles, cup pulls, knobs or T-bars. | Front width, centre-to-centre size, repeated datum and visual balance. |
| Kitchen island | Coordinated pulls, knobs or feature hardware. | Long elevations, repeated centres, walkways, finish visibility and hand clearance. |
| Tall units & larders | Longer cabinet pulls. | Scale, leverage, vertical datum, projection, centres and door construction. |
| Integrated appliance panels | Project-reviewed long or appliance-scale pull route. | Panel construction, fixing, appliance clearances, projection and grip requirements. |
| Pantry & utility joinery | Coordinated knobs, T-bars, cup pulls and handles. | Practical grip, higher-use locations and continuity with the principal kitchen. |
01 · Product family
Choose the hardware language first.
Decide whether the scheme needs handles, knobs, T-bars, cup pulls, C pulls or a coordinated mixture before choosing individual sizes.
View Hardware Finder02 · Dimensions
Lock centres before drilling.
Confirm centre-to-centre, overall length, projection, front thickness and fixing conditions. Use custom-centre review where standard drilling does not suit the joinery.
Review Custom Centres03 · Finish
Approve the finish physically.
Check the selected finish against the actual cabinetry, timber, stone, appliances and project lighting before the main made-to-order quantity is released.
Order Finish Sign-Off SampleCabinet + appliance coordination
Use one hardware hierarchy from small cabinet fronts to full-height panels.
The strongest kitchen specifications coordinate product family, finish and visual weight while allowing the hardware scale to change with the cabinetry. A pull used successfully on a drawer is not automatically the correct size or fixing route for a tall larder or integrated refrigerator panel.
Standard cabinetry
Use knobs, T-bars, cup pulls and standard pull lengths according to door style, drawer width and grip requirement.
Browse hardwareTall units
Use longer pulls where the elevation and door size need greater leverage and stronger visual scale.
Tall-unit guideAppliance panels
Flag integrated refrigerator and appliance fronts early so panel construction, fixing, projection and clearances can be reviewed before drilling.
Send drawingsPantry & utility
Carry the main kitchen finish and product language into supporting rooms while adapting hardware type to day-to-day use.
Pantry & utility guideDimensional control
Resolve the drilling dimensions before the joinery is committed.
For two-point hardware, centre-to-centre is the drilling dimension. Overall length, projection and fixing conditions are separate decisions. Where several front sizes or appliance panels are involved, review the whole elevation rather than treating each handle independently.
Fixing centres
Confirm the exact centre-to-centre dimension from the selected product specification before drilling.
Centres matrixCustom centres
Use project review where bespoke joinery, existing holes or an architectural datum requires a non-standard centre.
Custom centresProjection & grip
Check usable hand clearance, adjacent doors, returns, fillers and appliance-bank conflicts before release.
Projection & fixingsPlacement
Set a repeatable position by cabinet type and elevation so the hardware reads as one controlled architectural line.
Size & placement
Before drilling: do not use overall handle length as a substitute for fixing centres. Use the current PDP or technical sheet and send drawings where the drilling condition remains uncertain.
Finish approval
Approve the finish beside the actual kitchen materials.
Screen colour is not a reliable approval method for a made-to-order metal finish. Review the physical finish against the cabinet door, timber, stone, appliance finish and room lighting before the main project quantity is released.
Cabinet colour
Paint tone, sheen and surrounding light can materially change how brass, bronze, black, nickel or stainless directions read.
Timber & stone
Compare the metal beside the actual veneer, timber sample and worktop rather than choosing from isolated swatches.
Living finishes
Heritage living finishes are intended to develop with handling and time. Approve the finish with that behaviour understood.
Material suitability
Where wear, humidity or cleaning conditions differ from a normal interior, review material and finish suitability separately from colour.
Hardware Schedule
Keep the approved kitchen specification in one controlled record.
Use a Hardware Schedule where several products, sizes, centres, finishes, rooms, appliance fronts or approving parties need to be coordinated. Missing decisions can remain open rather than being guessed.
| Schedule field | What it controls | Why it matters |
|---|---|---|
| Room / area | Main kitchen, island, pantry, utility or related joinery. | Keeps products and quantities tied to the correct location. |
| Drawing reference | Elevation, cabinet or joinery reference. | Connects the hardware decision to the design information. |
| Product & size | Exact Capramont product and approved dimension. | Prevents visual references being mistaken for the final specification. |
| Fixing centres | Centre-to-centre dimension for two-point hardware. | Controls drilling and future identification. |
| Finish / material | Approved finish or project-specific material route. | Connects the physical approval to the order. |
| Quantity | Required number by area or product. | Reduces counting and revision errors. |
| Approval / revision | What is approved, open or superseded. | Stops conflicting versions circulating before production. |
Made to order in England
Manufacturing follows the approved kitchen specification.
Capramont & Co manufactures cabinet hardware in England. The made-to-order route is particularly useful where the kitchen needs multiple sizes from one design family, custom centres, longer pulls, finish approval or a recorded specification for later additions and replacements.
Made to order
Manufacture follows the selected product, size, finish and approved project information rather than a generic stock schedule.
Custom dimensions
Eligible products can be reviewed for project-specific centres or dimensions where the joinery requires them.
Finish reference
Physical approval provides a clearer project reference than screen-only colour selection.
Project continuity
A recorded product and dimensional specification provides a useful basis for later additions or replacement requirements, subject to the current product and finish route.
Representative product proof
Review three different kitchen hardware directions.
These PDPs show three useful starting points for a bespoke kitchen specification. Use the live product pages as the source of truth for current sizes, finishes and product-specific technical information.
Varndell Cabinet Handle
Heritage pull route for classic shaker, in-frame, panelled and larder cabinetry where stronger turned detail is wanted.
Overall lengths: 170–690 mm. Centres: 88–570 mm.
Beaufort Cabinet Handle
Architectural pull route for flat-front, slim-frame shaker, fluted and contemporary cabinetry where a quieter linear detail is required.
Centres: 92–364 mm. Overall lengths: 107–379 mm.
Choose by kitchen type
Move into the application guide that matches the cabinetry.
This authority page is the kitchen parent. The guides below answer narrower questions about cabinet construction, placement and use conditions.
Shaker kitchensKnobs, T-bars, cup pulls and handles aligned to rails, stiles and drawer fronts.
Inset / in-frameClearance, frame, reveal, centre and placement control for framed cabinetry.
Flat-front kitchensLinear proportion, datum, projection and placement for slab and minimal cabinetry.
Appliance pulls & tall unitsLong-pull scale, leverage, clearances and appliance-panel review.
Pantry & utility roomsWorking hardware and continuity with the principal kitchen specification.
Whole-home joineryExtend the kitchen hardware language into wardrobes, vanities and fitted rooms.
Size & placementChoose handle length and position by cabinet front rather than visual guesswork.
Materials & FinishesReview finish behaviour, material routes and physical approval before production.
Kitchen studios
Review Capramont as a supplier.
Use the supplier-review route for product proof, samples, technical fit, trade suitability and project workflow before introducing Capramont to a client.
Supplier ReviewJoiners & designers
Have drawings or door counts?
Send elevations, appliance fronts, room lists, centre requirements or early schedules before the hardware and drilling plan are finalised.
Project & Drawing ReviewTrade projects
Need repeat project support?
Use Trade Access when the business has a genuine role in specifying, purchasing, installing or coordinating cabinet hardware for client projects.
Trade AccessDirect answers
Luxury kitchen cabinet hardware questions.
Does Capramont manufacture cabinet hardware for bespoke kitchens?
Yes. Capramont & Co manufactures made-to-order cabinet hardware in England for bespoke kitchens and fitted joinery, including cabinet handles, knobs, T-bars, cup pulls, C pulls and longer pull formats.
Can cabinet and appliance hardware be coordinated?
Yes. Standard cabinet hardware and longer pull routes can be considered together so product family, finish, scale and placement remain coordinated. Integrated appliance panels should be reviewed against the actual panel and fixing conditions.
Can Capramont make custom fixing centres?
Eligible made-to-order products can be reviewed for custom centres where standard centre-to-centre dimensions do not suit bespoke joinery, existing drilling or the required elevation.
Can Capramont review kitchen drawings?
Yes. Use Project & Drawing Review for cabinetry elevations, appliance fronts, door counts, centre requirements, existing holes, custom dimensions and finish questions before production release.
Can the finish be approved before production?
Yes. A physical finish sign-off sample can be reviewed beside cabinetry, timber, stone, appliances and project lighting before the main made-to-order quantity is released.
When should a kitchen use a Hardware Schedule?
Use a Hardware Schedule when several products, sizes, centres, finishes, quantities, rooms or approving parties need to be controlled in one project record.
Next step
Start with the cabinetry, then lock the hardware specification.
Choose the product family, confirm the required scale and centres, flag appliance and tall-panel conditions, approve the finish physically and record the final selections before made-to-order production.