Brunswick Cabinet Handle
Strong route for appliance banks, contemporary classic kitchens and full-height cabinetry where a long pull family is needed.
Appliance Pulls & Tall Unit Hardware Guide | Capramont & Co
For tall units and integrated appliance banks, use longer cabinet pulls with consistent centres, a fixed vertical datum and confirmed appliance clearances. Capramont & Co makes British-made cabinet hardware for these project areas, with samples, finish sign-off, product tear sheets, custom-centre review and project/drawing support before made-to-order production.
For tall units and integrated appliance banks, use longer cabinet pulls with consistent centres, a fixed vertical datum and confirmed appliance clearances. Capramont & Co makes British-made cabinet hardware for these project areas, with samples, finish sign-off, product tear sheets, custom-centre review and project/drawing support before made-to-order production.
Application guide
The tall-door leverage rule
For tall units, larder doors, pantry banks and integrated appliance panels, the handle is not only a decorative choice. It controls grip, scale, drilling centres, vertical alignment and future re-ordering. Choose the pull family, lock the centres, set one datum, then approve the finish physically before made-to-order production.
Specifier method
Specify the appliance bank before choosing the final pull
Integrated appliances and full-height cabinetry create more risk than ordinary drawer hardware. The safest route is to set a repeatable rule for length, centre-to-centre, placement and finish, then check drawings before release.
1
Choose the pull family
Use a longer cabinet pull route for tall doors and appliance panels. Short pulls or knobs can look under-scaled on full-height cabinetry.
2
Lock the centres
Centre-to-centre is the drilling dimension. Keep it consistent across the bank where possible, especially for phased or repeat work.
3
Check clearances
Confirm projection, adjacent doors, appliance panels, fillers and door thickness before drilling or production release.
Decision table
Tall unit and appliance pull specification checks
Use this table as the working checklist before product sign-off. Projection and fixing details should be checked on the PDP or product tear sheet before order release.
| Project area | Best hardware route | Specification note | Next step |
|---|---|---|---|
| Full-height larder | Long cabinet pull | Use a longer pull for leverage and visual scale. Keep the vertical placement line controlled. | View Hardware Finder |
| Integrated fridge or freezer housing | Appliance pull / long pull | Check panel thickness, appliance clearances, fillers and adjacent door swing before drilling. | Send project details |
| Appliance wall | One repeated pull family | Repeat the centre rule and finish across the bank unless function requires a change. | Start Hardware Schedule |
| Tall pantry bank | Long pulls on main doors | Use smaller coordinated hardware only on secondary internal drawers or small doors. | Order finish sample |
| Multi-room kitchen and utility scheme | Hardware Schedule | Document products, sizes, centres, finishes, quantities and room locations for future phases. | See what is included |
Product proof
Long-pull routes for tall units and appliance banks
These products are the main routes to review for tall-unit and appliance-bank specification. Key centre-to-centre and overall length data is shown directly on the page so the guide is useful before opening a PDF.
Harrington Handle
Useful for tall units, appliance walls and repeated cabinet banks where a longer handle needs to sit calmly across the elevation.
Manresa Cabinet Handle
Good for tall cabinetry and appliance-bank scale where a softer rounded profile is preferred.
Egerton Handle - P2
Flat-profile route for modern appliance banks, Art Deco lines and integrated panels requiring a cleaner bar form.
Burlington Cabinet Handle
Useful where a more linear, Deco-influenced handle is required on taller cabinetry or appliance banks.
Maddox Cabinet Handle
Long-pull route for cabinetry banks where centre consistency and a restrained round form matter.
Also review Pembridge Cabinet Handle, Melbury Cabinet Handle, Westbourne Cabinet Pull and Beaufort Cabinet Handle where the design direction needs a coordinated supporting handle.
Before order release
When to send project details
Send drawings, elevations or project notes when the appliance bank includes integrated fridge/freezer panels, several tall doors, custom centres, existing holes, unusual panel thickness, phased orders or a multi-room hardware schedule.
- Door and drawer counts
- Proposed products, lengths and centres
- Panel thickness and appliance locations
- Finish direction and sign-off requirement
- Any existing schedule or replacement constraint
Finish control
Approve the finish physically
Appliance walls and tall-unit banks make finish differences highly visible. Use physical sample routes before made-to-order production, especially where the hardware sits beside stone, timber, paint, taps or appliances.
- Finish Sign-Off Knob for final approval
- Heritage Finish Knobs Palette for finish comparison
- Atelier Metals Knob Samples for specialist materials
- Materials and Finishes for finish family review
Specification control
Use a Hardware Schedule when the bank affects more than one room
For whole-home, kitchen-plus-utility or project-led work, the safest route is one controlled schedule showing product, size, centres, finish, quantity, room and approval status.
| Risk | What can go wrong | Control route |
|---|---|---|
| Mixed centres | Drilling varies across the appliance bank and later re-ordering becomes harder. | Start a Hardware Schedule |
| Finish chosen from screen only | The handle finish may read differently beside cabinetry, stone, timber or appliances. | Order Finish Sign-Off Sample |
| Panel thickness unknown | Fixing assumptions may be wrong or incomplete at the point of order. | Send Project Details |
| Projection not checked | Handles may conflict with fillers, adjacent doors or appliance-bank clearances. | Project & Drawing Review |
Common questions
Appliance pull and tall unit FAQs
What is an appliance pull?
An appliance pull is a longer cabinet pull used on integrated appliance panels, fridge/freezer housings, larders, appliance banks and tall units. It is chosen for leverage, scale and repeatability on larger cabinet faces.
What size pull should I use on a tall unit?
Use a longer pull than you would use on a small drawer or base-cabinet door. The right size depends on door height, cabinet style, centre-to-centre requirement, projection, appliance clearance and the rest of the hardware schedule.
Should every pull in an appliance bank be the same length?
Usually yes, where the doors and panels allow it. A repeated pull length and centre rule creates a calmer appliance wall. Vary the handle only where door size, function or a technical constraint requires it.
Can I use knobs on tall units?
Knobs can work on smaller internal doors, but full-height larder doors and appliance panels usually suit longer pulls. Longer pulls provide stronger leverage and better visual scale on large vertical surfaces.
What should be checked before drilling?
Check centre-to-centre dimensions, overall length, projection, door thickness, appliance clearances, filler positions and vertical alignment. For project work, confirm these before production and before drilling.
When should I start a Hardware Schedule?
Start a Hardware Schedule when the project includes multiple rooms, several hardware sizes, appliance pulls, custom centres, finish approvals, repeat orders or several approving parties.
Next step
Choose the pull family, then confirm the finish and centres
Start with Hardware Finder if you are still choosing the product route. Use finish sign-off when the design direction is close. Send project details when the appliance bank involves drawings, panel thickness, custom centres or schedule control.