Finish Sign-Off Knob
Primary physical approval route when a finish needs to be checked before made-to-order production.
Cabinet Hardware Project & Drawing Review — Australia
Capramont & Co reviews cabinet hardware drawings, elevations, schedules, door counts and finish questions before made-to-order production. Send project details when you need help choosing British-made cabinet handles, confirming centres, checking quantities, planning finish sign-off or deciding whether a Hardware Schedule is needed.
Project support
Send drawings, schedules or finish questions before ordering
For Australian cabinet makers, architectural joiners, interior designers and project teams, use this route when a project needs more than simple product browsing. Capramont & Co can review drawings, elevations, door counts, existing schedules, centre-to-centre questions and finish direction before the correct product, sample or Hardware Schedule route is confirmed. Use it for CNC drawings, whole-home joinery, coastal projects and phased approvals where sizes, finishes, quantities or lead times need to be controlled.
For bespoke kitchen projects: use Luxury Cabinet Hardware for Bespoke Kitchens as the kitchen application route, then use Project & Drawing Review for project-specific checks before drilling or production.
The information that makes a project review useful
You do not need a perfect final schedule to start. Early drawings, elevations, counts, finish notes and existing hardware references can all help Capramont & Co recommend the right next step.
| Send this | Useful when | Why it helps |
|---|---|---|
| Cabinetry drawings | New kitchens, wardrobes, utility rooms, studies or whole-home schemes | Helps review product type, handle scale, placement route and whether a Hardware Schedule is needed. |
| Elevations | Drawer runs, tall units, appliance banks or repeated cabinetry | Helps assess proportion, repeat lines, visual balance and product suitability. |
| Door and drawer counts | Quotation, quantity planning or room-by-room control | Helps identify quantities, product groups and whether the enquiry should become a schedule. |
| Existing hardware schedule | A project already has products, sizes or finishes listed | Helps review product, size, finish and quantity consistency before final ordering. |
| Existing hole centres | Replacement, retrofit or non-standard joinery | Helps assess best-fit products, centre-to-centre checks or custom-centre review. |
| Cabinet colour or finish notes | Painted fronts, timber, dark woods, stone or metal details are involved | Helps route the project to samples, finish sign-off or material/finish guidance. |
| Reference imagery | The design direction is known but the product is not fixed | Helps narrow collection style, finish family and hardware type. |
| Project timeline | The work is live, phased or has approval dates | Helps align sample review, lead times and production release. |
Project enquiry, Hardware Schedule, sample or trade route?
Use the route that best matches the stage of the project.
Early introduction
Use when you are new to Capramont & Co and want a supplier, product or project introduction first.
New to Capramont? Start HereProject details
Use when you have drawings, elevations, a rough scope, finish questions or defined products to review.
Send Project DetailsHardware Schedule
Use for live, multi-room or schedule-led projects needing products, sizes, finishes and quantities controlled.
Start a Hardware ScheduleFinish sign-off
Use when cabinetry colour, timber, stone or client approval makes physical finish review important.
Order Finish Sign-Off SampleProduct browsing
Use when you want to compare product type, style, size and finish before sending a project.
View Hardware FinderTrade access
Use for trade account review, repeat specification, cabinet makers, architectural joiners, kitchen studios and project-led buyers.
Apply for Trade AccessFinish guidance
Use when the hardware finish must be considered against cabinet colour, timber, stone, humidity, cleaning or room use.
View Materials and FinishesSpecification hub
Use when you need the central guide route for samples, finish sign-off, custom centres and schedules.
View Specification Centre
Review scope
What Capramont reviews from drawings and schedules
The review is designed to reduce specification uncertainty before made-to-order cabinet hardware is released into production.
- Product type and collection route
- Handle scale, length and knob diameter
- Centres, existing holes and custom-centre questions
- Finish family and sign-off route
- Quantity, room and schedule logic
- Product pages, images, videos and tear sheets where available
Review output
The next step depends on the project stage
Depending on the information supplied, the next step may be a product shortlist, a finish sign-off sample, a sample route, a project enquiry, trade review or a Hardware Schedule.
Simple project
A product shortlist, finish route or quotation enquiry may be enough.
Complex project
A Hardware Schedule may be better where rooms, quantities, approvals and revisions need control.
What happens after you send project details
Send details
Submit drawings, elevations, schedules, door counts, finish questions or rough project notes.
Review route
Capramont reviews whether the enquiry is best handled as product, sample, project or schedule support.
Check specification
Product type, scale, centres, finish family and quantities are considered where information is supplied.
Check product information
Product pages, product imagery, videos, tear sheets and finish samples are used where relevant and available.
Move forward
The project moves to enquiry, sample, finish sign-off, trade review or Hardware Schedule route.
Information available before ordering
Use verified product pages, specification data, finish samples and product tear sheets where available.
Beaufort Cabinet Handle
Handle route with visible centres, overall lengths, product imagery and A4 specification sheet.
Westbourne Cabinet Pull
Pull route for feature joinery, flat fronts and Art Deco-led projects with A4 specification sheet.
Brunswick Cabinet Handle
Long-handle route for whole-home and project-led cabinetry with product page and spec sheet.
Manresa Cabinet Handle
Project-suitable handle route for longer pull sizes, schedule planning and specification review.
Eccleston Cup
Cup pull route for drawer fronts and Deco-led cabinetry with product page and A4 specification sheet.
Product examples to support project review
Use the product examples below to compare centres, sizes and sample routes before sending drawings or approving a schedule.
| Product route | Centres / sizes | Best use | Links |
|---|---|---|---|
| Beaufort Cabinet Handle | Centres: 92, 124, 156, 220, 284, 364 mm. Overall: 107, 139, 171, 235, 299, 379 mm. | Contemporary, slab, minimalist and technical centre review. | Product page |
| Westbourne Cabinet Pull | Centres: 92, 124, 156, 220, 284, 364 mm. Overall: 114, 146, 178, 242, 306, 392 mm. | Feature joinery, pull selection and Art Deco-led product review. | Product page |
| Brunswick Cabinet Handle | Centres: 158, 198, 225, 295, 355, 435, 675 mm. Overall: 170, 210, 240, 310, 370, 450, 690 mm. | Long-handle route for whole-home and project-led schedules. | Product page |
| Manresa Cabinet Handle | Centres: 98, 138, 168, 238, 298, 360, 600 mm. Overall: 170, 210, 240, 310, 370, 450, 690 mm. | Long-pull project route and schedule suitability. | Product page |
| Eccleston Cup | Centres: 50, 86, 138 mm. Overall: 60, 96, 148 mm. | Cup pull route for drawer fronts and Deco-led cabinetry. | Product page |
| Finish Sign-Off Knob | Project approval sample route. | Physical finish approval before made-to-order production. | Sample |
Finish sign-off
Finish questions should be reviewed physically where approval matters
Send cabinet colour, timber, stone, appliance finish, tap finish, room lighting and moodboard notes where the hardware finish needs to work across more than one surface or room.
- Use samples before final production approval.
- Use the finish sign-off knob when client approval matters.
- Use the finish guide when choosing between brass, bronze, nickel, black or stainless routes.
Centres and replacement
Custom centres, existing holes and non-standard joinery
If a project involves existing holes, non-standard joinery or unusual fixing positions, include centre-to-centre measurements and any relevant elevation notes with the enquiry.
- Measure from the centre of one fixing hole to the centre of the other.
- Include door or drawer width where possible.
- State whether the project is new joinery, replacement or retrofit.
Related pages for project-led specification
Use these related pages to continue with products, samples, finishes, project support and delivery planning.
Project support
Product discovery
Finishes and samples
Project and drawing review FAQs
Can I send Capramont & Co my cabinetry drawings?
Yes. You can send cabinetry drawings, elevations, schedules, door counts, finish questions or rough project notes so Capramont & Co can advise on the correct cabinet hardware route.
Do I need finished drawings before sending a project enquiry?
No. Finished drawings are helpful, but early elevations, door counts, mood references, room lists and finish questions can also be enough for early product direction.
What does Capramont review from a drawing?
Capramont can review product type, handle scale, centre-to-centre requirements, quantities, room consistency, finish direction and whether the project should move into a Hardware Schedule.
Can Capramont help with custom centres?
Yes. If your joinery, existing holes or replacement project needs non-standard centres, include the centre-to-centre measurement or drawing note in your project enquiry.
When should I start a Hardware Schedule instead?
Start a Hardware Schedule when the project is live, multi-room, schedule-led or needs controlled products, sizes, finishes, quantities, approvals and revisions.
Can a trade or project team use this page?
Yes. Australian cabinet makers, architectural joiners, interior designers and project teams can send drawings, elevations, fixing questions, centre requirements, door counts or project schedules for review.
Can I choose finishes before sending drawings?
Yes, but physical finish sign-off is recommended before made-to-order production. Use samples or a Finish Sign-Off Knob when finish approval matters.
Will Capramont confirm the final order from drawings alone?
Not always. Drawings can support product direction and review, but final specification may require finish sign-off, confirmed quantities, centres, approvals or a Hardware Schedule.
Send the project before the hardware is fixed
Send drawings, elevations, schedules, door counts or finish questions when the hardware choice affects the specification, quotation, finish approval or made-to-order production route.
Australia · Project & Drawing Review
Resolve the hardware specification before the joinery is drilled.
For Australian residential and fitted-joinery projects, hardware decisions often need to coordinate cabinet-front proportions, metric fixing centres, long appliance pulls, room-by-room quantities and finish consistency before production begins.
Made to Order in England
Project-Specific Metric Centres
Physical Finish Approval
Drawing & Schedule Review
Send the project information before every decision is final.
Capramont & Co supports interior designers, architects, kitchen studios, cabinet makers, architectural joiners and project teams working on custom kitchens, wardrobes, laundries, butler’s pantries and whole-home joinery.
Cabinet elevations, CNC or workshop drawings, door and drawer schedules, appliance panels and fixing-centre requirements are useful starting information.
- Cabinetry and joinery drawings or elevations
- Room names and door or drawer quantities
- Required metric fixing centres or existing hole spacing
- Appliance-panel dimensions where relevant
- Product shortlists or preferred hardware types
- Material, finish and client-approval notes
What the review is intended to resolve.
This route is particularly useful where a cabinet maker or architectural joiner needs hardware dimensions confirmed before machining or drilling the joinery package.
- Suitable product type and visual scale
- Fixing centres and project-specific dimensions
- Overall length, projection and practical clearance
- Appliance-pull requirements
- Material and finish approval route
- Whether the project should move into a Hardware Schedule
Australia project decisions
Three areas to settle before made-to-order production.
Coordinate the hardware with the cabinetry
Review metric fixing centres, overall handle length, projection and fixing requirements against cabinetry drawings before doors and drawer fronts are drilled.
Approve material and finish deliberately
Coastal exposure, humid interiors, frequent handling and living-finish expectations can influence the appropriate material and finish route. Physical approval is recommended where appearance or environment matters.
Keep multi-room decisions in one record
Whole-home kitchens, wardrobes, laundries and utility areas can be brought into one Hardware Schedule so product, size, finish, room and quantity remain controlled across the project.
Review sequence
From drawing information to an approved hardware package.
Send drawings
Provide the available cabinetry information, even if the project is still developing.
Review dimensions
Confirm fixing centres, overall size, projection, appliance pulls and any custom requirements.
Approve the finish
Use a physical hardware reference where material, colour, patina or client approval needs confirmation.
Control the order
Move multi-room or repeated specifications into a Hardware Schedule before production.
Australia environment and use
Coastal exposure, humid interiors, frequent handling and living-finish expectations can influence the appropriate material and finish route. Physical approval is recommended where appearance or environment matters.
Australia delivery planning
Production planning should be coordinated with Australian import GST, customs processing, courier brokerage and final project delivery requirements.
Direct answers
Common project-review questions.
Can I send Capramont drawings before I have selected the final hardware?
Yes. Early elevations, room lists, quantities, cabinetry dimensions and finish references can be reviewed before the complete product specification is fixed. The review can help determine the most appropriate product, sample or Hardware Schedule route.
Can Capramont review non-standard metric fixing centres?
Yes. Project-specific metric fixing centres and other eligible custom dimensions can be reviewed against the joinery information before made-to-order production. Final manufacturing dimensions should be confirmed before cabinet doors and drawer fronts are drilled.
Can the material and finish be approved before the main order?
Yes. A physical finish sample can be used as the approval reference where material, colour, surface character or client sign-off needs to be confirmed before the wider hardware package is manufactured.
When should a Australia project use a Hardware Schedule?
A Hardware Schedule is useful when the project covers multiple rooms, repeated products, different fixing centres, approved finishes, phased ordering or a project team that needs one controlled record of the hardware specification before production.
Send the Australia project before product, finish and dimensional decisions are locked in.
Start with the drawings, room schedule or project information you already have. Capramont can then establish whether the next step should be dimensional review, a physical finish sample, product selection or a controlled Hardware Schedule.