Harrington Handle
Classic long-pull route for dressing rooms and full-height wardrobe doors.
Centres: 106, 146, 176, 246, 306, 376, 616 mm
Overall: 170, 210, 240, 310, 370, 450, 690 mm
Wardrobe & Dressing Room Hardware Guide | Capramont & Co
For wardrobes and dressing rooms, choose hardware by door height, repeat rhythm, centres, projection and finish sign-off. Capramont & Co supplies British-made cabinet hardware with long pulls, C pulls, knobs, samples, tear sheets and project review so studios and joiners can confirm the handle line, finish and fixing details before made-to-order production.
Specification route
Start with the wardrobe line, not the handle in isolation
For fitted wardrobes and dressing rooms, the safest specification route is to decide the handle line, scale, centres and finish approval route before drilling or releasing made-to-order hardware. Choose samples first, then send drawings if the elevation, existing centres or quantities need checking.
1
Choose the line
Decide whether the wardrobe bank needs long vertical pulls, discreet C pulls, or smaller hardware for drawers and secondary joinery.
2
Check the centres
Confirm centre-to-centre fixing distances before drilling, especially on fitted wardrobes, replacement fronts or custom joinery.
3
Sign off the finish
Review the finish physically under bedroom, dressing-room and mirror lighting before made-to-order production.
Room use
Wardrobe and dressing room hardware by zone
Use the same design language across the room, then change scale by function. Full-height wardrobe doors need confident grip and visual rhythm; dressing tables, islands and internal drawers usually need smaller supporting hardware.
| Wardrobe or dressing-room zone | Best hardware direction | Specification note | Best next step |
|---|---|---|---|
| Full-height wardrobe doors | Long pulls | Use a repeated vertical pull line to create proportion and a calm elevation. | View Hardware Finder |
| Fitted wardrobe banks | Long pulls or C pulls | Keep the handle line and centres consistent across the bank where possible. | Send Project Details |
| Dressing-table drawers | Short pulls, knobs or T-bars | Use smaller hardware from the same collection or finish family. | Choose Samples |
| Wardrobe islands | Pulls or knobs | Coordinate with the wardrobe bank, but scale down for drawer use. | Order Finish-Sign Off Sample |
| Minimal slab wardrobe fronts | C pulls or restrained long pulls | Check projection, grip clearance and fixing position before release. | Project & Drawing Review |
Sizing and centres
Control overall length, centre-to-centre and repeat rhythm
A wardrobe handle has two important dimensions: the visible overall length and the centre-to-centre fixing distance. Overall length controls proportion; centres control drilling, replacement and fitting accuracy.
The Wardrobe Line Rule
Use one clear visual pull line across each wardrobe bank. If product sizes vary, vary them by joinery function rather than mixing unrelated styles across the same elevation.
- Confirm handle position before drilling.
- Keep the main wardrobe pull length consistent where possible.
- Use shorter hardware for drawers and secondary joinery.
- Check projection and grip clearance before production.
Replacement or custom centres
If wardrobes already have drilled fronts, measure the existing centre-to-centre distance first. Do not choose by visible handle length alone.
| Product type | Best wardrobe use | Watch point |
|---|---|---|
| Long pull | Full-height robe doors, tall joinery and dressing-room banks. | Confirm centres, door thickness and handle line before release. |
| Short / medium pull | Drawer packs, smaller doors and dressing tables. | Keep alignment consistent across the elevation. |
| C pull | Minimal slab fronts, discreet wardrobe details and contemporary joinery. | Check grip clearance and fixing position. |
| Knob | Internal drawers, small doors and dressing-table drawers. | Avoid using too small a grip on heavy full-height doors. |
| T-bar | Small drawers and secondary cabinetry. | Use as a supporting detail rather than the main tall-door handle. |
Product proof
Product routes to review for wardrobes and dressing rooms
These PDPs give specifiers visible product proof before ordering: product imagery, centre sizes, overall lengths and UK A4 tear sheets.
Maddox Cabinet Handle
Long-pull route with varied centre sizes, including the 322 mm centre option.
Centres: 84, 124, 134, 204, 264, 322, 562 mm
Overall: 170, 210, 240, 310, 370, 450, 690 mm
Manresa Handle
Long-pull route for bedroom joinery, dressing rooms and larger wardrobe elevations.
Centres: 98, 138, 168, 238, 298, 360, 600 mm
Overall: 170, 210, 240, 310, 370, 450, 690 mm
Pembridge Cabinet Handle
Wardrobe and dressing-room route where a slimmer long-pull rhythm is needed.
Centres: 78, 118, 130, 200, 260, 318, 558 mm
Overall: 170, 210, 240, 310, 370, 450, 690 mm
Varndell Cabinet Handle
Bedroom, wardrobe and dressing-room pull route with long-pull scale options.
Centres: 88, 128, 140, 210, 270, 330, 570 mm
Overall: 170, 210, 240, 310, 370, 450, 690 mm
Beaufort Cabinet Handle
Contemporary pull route for wardrobes, slab fronts and dressing-room joinery.
Centres: 92, 124, 156, 220, 284, 364 mm
Overall: 107, 139, 171, 235, 299, 379 mm
Westbourne Cabinet Pull
Refined pull route for dressing-room drawers, feature wardrobes and Art Deco-influenced joinery.
Centres: 92, 124, 156, 220, 284, 364 mm
Overall: 114, 146, 178, 242, 306, 392 mm
Beaufort C Pull
Discreet C-pull route for slab, fluted, ribbed and minimal wardrobe fronts.
Centres: 32, 46, 58 mm
Overall: 44, 58, 70 mm
Westbourne C Pull
Discreet C-pull route for minimal, Art Deco and refined dressing-room cabinetry.
Centres: 32, 46, 58 mm
Overall: 44, 58, 70 mm
Finish sign-off
Finish sign-off matters more in dressing rooms
Bedroom lighting, mirrors, fabrics, stone and painted joinery can change how brass, bronze, black, nickel and stainless finishes read. Use physical samples before made-to-order production when the finish is repeated across a wardrobe bank or client-facing dressing room.
Heritage finish comparison
Use the Heritage Finish Knobs Palette when comparing aged brass, bronze, black, satin brass or stainless routes.
Final finish approval
Use the Finish Sign-Off Knob when the client, studio or joinery team needs physical approval before production.
Shape and scale check
Use the Essential Handle & Knob Set when the project needs a physical grip, scale and proportion check.
Studio / project review
Use the Studio Projects Sample Box where a studio, client or project team needs a structured sample route.
Proof before order
Specification proof available before ordering
Capramont & Co provides specification proof before wardrobe and dressing room hardware is released for made-to-order production: physical finish sign-off, PDP imagery, product tear sheets, visible centres, project review and Hardware Schedule support.
| Proof route | Use it for | Link |
|---|---|---|
| Physical finish sign-off | Final finish approval before made-to-order production. | Finish Sign-Off Knob |
| PDP imagery and tear sheets | Review product scale, centres, overall length and specification data. | Hardware Finder |
| Project / drawing review | Send elevations, door counts, existing centres or product shortlist questions. | Project & Drawing Review |
| Hardware Schedule | Control product, finish, size, quantity, room and approval references. | Start a Hardware Schedule |
| Trade route | For approved studios, joiners, cabinet makers, designers and project buyers. | Trade Access |
Project control
When to send wardrobe drawings or start a Hardware Schedule
Samples may be enough for a single wardrobe bank. Use project review when there are elevations, existing centres, quantities or finish questions. Use a Hardware Schedule when multiple rooms, approvals, revisions or repeat orders need one controlled record.
Use samples when...
- You are still choosing finish direction.
- You need to compare grip, shape or scale.
- The project is not yet at drawing-review stage.
Send project details when...
- You have elevations, door counts or an early shortlist.
- Existing centres need checking.
- Finish, material or custom size questions need review.
Start a schedule when...
- The wardrobe package spans several rooms.
- Approvals, revisions or phased ordering need tracking.
- Products, finishes, sizes and quantities need one record.
Common questions
Wardrobe and dressing room hardware FAQs
What hardware works best for full-height wardrobe doors?
Long pulls usually work best for full-height wardrobe doors because they create a secure grip point and a consistent vertical line. Use smaller pulls, knobs or T-bars for dressing-table drawers, internal drawers and secondary joinery.
Should wardrobe handles be vertical or horizontal?
Full-height wardrobe pulls are usually placed vertically, while dressing-table drawers and internal drawers often use horizontal pulls. The important point is to agree one clear handle line across each elevation before drilling.
Do wardrobe handles need finish sign-off?
Finish sign-off is strongly recommended for wardrobes and dressing rooms because mirrors, fabrics, warm lighting and painted joinery can change how metal finishes appear. Use a physical sample before made-to-order production.
Can Capramont review fitted wardrobe drawings?
Yes. Send elevations, door counts, existing centre measurements, preferred products, finish direction and project timing through the project enquiry route. Larger or multi-room schemes can be moved into a Hardware Schedule.
Can I replace existing wardrobe handles without redrilling?
Possibly, but existing centre-to-centre measurements must be checked first. Measure the fixing holes, not just the visible handle length. If the centres do not match, use the custom-centre review route.
When should I use a Hardware Schedule?
Use a Hardware Schedule when the wardrobe or dressing-room package includes multiple rooms, varied product sizes, finish approvals, phased ordering, revisions or several approving parties. It creates one controlled specification record.