Finish Sign-Off Knob
Primary physical approval route when a finish needs to be checked before made-to-order production.
Cabinet Hardware Project & Drawing Review — Hong Kong
For Hong Kong interior designers, cabinet makers and project teams working on apartments, penthouses and compact joinery. Send cabinetry drawings, compact-front details, fixing-depth notes, room schedules, quantities and finish questions for review before made-to-order production. We can help confirm projection, fixing centres, handle scale, finish sign-off and whether the project should move into a Hardware Schedule.
Project support
Send drawings, schedules or finish questions before ordering
For Hong Kong interior designers, cabinet makers and project teams working on apartments, penthouses and compact joinery, use this route when a project needs more than simple product browsing. Capramont & Co can review drawings, elevations, door counts, existing schedules, centre-to-centre questions and finish direction before the correct product, sample or Hardware Schedule route is confirmed. Use it where compact fronts, fixing depth, projection, quantities or phased project packages need to be checked before ordering.
For bespoke kitchen projects: use Luxury Cabinet Hardware for Bespoke Kitchens as the kitchen application route, then use Project & Drawing Review for project-specific checks before drilling or production.
The information that makes a project review useful
You do not need a perfect final schedule to start. Early drawings, elevations, counts, finish notes and existing hardware references can all help Capramont & Co recommend the right next step.
| Send this | Useful when | Why it helps |
|---|---|---|
| Cabinetry drawings | New kitchens, wardrobes, utility rooms, studies or whole-home schemes | Helps review product type, handle scale, placement route and whether a Hardware Schedule is needed. |
| Elevations | Drawer runs, tall units, appliance banks or repeated cabinetry | Helps assess proportion, repeat lines, visual balance and product suitability. |
| Door and drawer counts | Quotation, quantity planning or room-by-room control | Helps identify quantities, product groups and whether the enquiry should become a schedule. |
| Existing hardware schedule | A project already has products, sizes or finishes listed | Helps review product, size, finish and quantity consistency before final ordering. |
| Existing hole centres | Replacement, retrofit or non-standard joinery | Helps assess best-fit products, centre-to-centre checks or custom-centre review. |
| Cabinet colour or finish notes | Painted fronts, timber, dark woods, stone or metal details are involved | Helps route the project to samples, finish sign-off or material/finish guidance. |
| Reference imagery | The design direction is known but the product is not fixed | Helps narrow collection style, finish family and hardware type. |
| Project timeline | The work is live, phased or has approval dates | Helps align sample review, lead times and production release. |
Project enquiry, Hardware Schedule, sample or trade route?
Use the route that best matches the stage of the project.
Early introduction
Use when you are new to Capramont & Co and want a supplier, product or project introduction first.
New to Capramont? Start HereProject details
Use when you have drawings, elevations, a rough scope, finish questions or defined products to review.
Send Project DetailsHardware Schedule
Use for live, multi-room or schedule-led projects needing products, sizes, finishes and quantities controlled.
Start a Hardware ScheduleFinish sign-off
Use when cabinetry colour, timber, stone or client approval makes physical finish review important.
Order Finish Sign-Off SampleProduct browsing
Use when you want to compare product type, style, size and finish before sending a project.
View Hardware FinderTrade access
Use for trade account review, repeat specification, interior designers, cabinet makers, fit-out teams and project-led buyers.
Apply for Trade AccessFinish guidance
Use when the hardware finish must be considered against cabinet colour, timber, stone, humidity, cleaning or room use.
View Materials and FinishesSpecification hub
Use when you need the central guide route for samples, finish sign-off, custom centres and schedules.
View Specification Centre
Review scope
What Capramont reviews from drawings and schedules
The review is designed to reduce specification uncertainty before made-to-order cabinet hardware is released into production.
- Product type and collection route
- Handle scale, length and knob diameter
- Centres, existing holes and custom-centre questions
- Finish family and sign-off route
- Quantity, room and schedule logic
- Product pages, images, videos and tear sheets where available
Review output
The next step depends on the project stage
Depending on the information supplied, the next step may be a product shortlist, a finish sign-off sample, a sample route, a project enquiry, trade review or a Hardware Schedule.
Simple project
A product shortlist, finish route or quotation enquiry may be enough.
Complex project
A Hardware Schedule may be better where rooms, quantities, approvals and revisions need control.
What happens after you send project details
Send details
Submit drawings, elevations, schedules, door counts, finish questions or rough project notes.
Review route
Capramont reviews whether the enquiry is best handled as product, sample, project or schedule support.
Check specification
Product type, scale, centres, finish family and quantities are considered where information is supplied.
Check product information
Product pages, product imagery, videos, tear sheets and finish samples are used where relevant and available.
Move forward
The project moves to enquiry, sample, finish sign-off, trade review or Hardware Schedule route.
Information available before ordering
Use verified product pages, specification data, finish samples and product tear sheets where available.
Beaufort Cabinet Handle
Handle route with visible centres, overall lengths, product imagery and A4 specification sheet.
Westbourne Cabinet Pull
Pull route for feature joinery, flat fronts and Art Deco-led projects with A4 specification sheet.
Brunswick Cabinet Handle
Long-handle route for whole-home and project-led cabinetry with product page and spec sheet.
Manresa Cabinet Handle
Project-suitable handle route for longer pull sizes, schedule planning and specification review.
Eccleston Cup
Cup pull route for drawer fronts and Deco-led cabinetry with product page and A4 specification sheet.
Product examples to support project review
Use the product examples below to compare centres, sizes and sample routes before sending drawings or approving a schedule.
| Product route | Centres / sizes | Best use | Links |
|---|---|---|---|
| Beaufort Cabinet Handle | Centres: 92, 124, 156, 220, 284, 364 mm. Overall: 107, 139, 171, 235, 299, 379 mm. | Contemporary, slab, minimalist and technical centre review. | Product page |
| Westbourne Cabinet Pull | Centres: 92, 124, 156, 220, 284, 364 mm. Overall: 114, 146, 178, 242, 306, 392 mm. | Feature joinery, pull selection and Art Deco-led product review. | Product page |
| Brunswick Cabinet Handle | Centres: 158, 198, 225, 295, 355, 435, 675 mm. Overall: 170, 210, 240, 310, 370, 450, 690 mm. | Long-handle route for whole-home and project-led schedules. | Product page |
| Manresa Cabinet Handle | Centres: 98, 138, 168, 238, 298, 360, 600 mm. Overall: 170, 210, 240, 310, 370, 450, 690 mm. | Long-pull project route and schedule suitability. | Product page |
| Eccleston Cup | Centres: 50, 86, 138 mm. Overall: 60, 96, 148 mm. | Cup pull route for drawer fronts and Deco-led cabinetry. | Product page |
| Finish Sign-Off Knob | Project approval sample route. | Physical finish approval before made-to-order production. | Sample |
Finish sign-off
Finish questions should be reviewed physically where approval matters
Send cabinet colour, timber, stone, appliance finish, tap finish, room lighting and moodboard notes where the hardware finish needs to work across more than one surface or room.
- Use samples before final production approval.
- Use the finish sign-off knob when client approval matters.
- Use the finish guide when choosing between brass, bronze, nickel, black or stainless routes.
Centres and replacement
Custom centres, existing holes and non-standard joinery
If a project involves existing holes, non-standard joinery or unusual fixing positions, include centre-to-centre measurements and any relevant elevation notes with the enquiry.
- Measure from the centre of one fixing hole to the centre of the other.
- Include door or drawer width where possible.
- State whether the project is new joinery, replacement or retrofit.
Related pages for project-led specification
Use these related pages to continue with products, samples, finishes, project support and delivery planning.
Project support
Product discovery
Finishes and samples
Project and drawing review FAQs
Can I send Capramont & Co my cabinetry drawings?
Yes. You can send cabinetry drawings, elevations, schedules, door counts, finish questions or rough project notes so Capramont & Co can advise on the correct cabinet hardware route.
Do I need finished drawings before sending a project enquiry?
No. Finished drawings are helpful, but early elevations, door counts, mood references, room lists and finish questions can also be enough for early product direction.
What does Capramont review from a drawing?
Capramont can review product type, handle scale, centre-to-centre requirements, quantities, room consistency, finish direction and whether the project should move into a Hardware Schedule.
Can Capramont help with custom centres?
Yes. If your joinery, existing holes or replacement project needs non-standard centres, include the centre-to-centre measurement or drawing note in your project enquiry.
When should I start a Hardware Schedule instead?
Start a Hardware Schedule when the project is live, multi-room, schedule-led or needs controlled products, sizes, finishes, quantities, approvals and revisions.
Can a trade or project team use this page?
Yes. Hong Kong interior designers, cabinet makers and project teams working on apartments, penthouses and compact joinery can send drawings, elevations, fixing questions, centre requirements, door counts or project schedules for review.
Can I choose finishes before sending drawings?
Yes, but physical finish sign-off is recommended before made-to-order production. Use samples or a Finish Sign-Off Knob when finish approval matters.
Will Capramont confirm the final order from drawings alone?
Not always. Drawings can support product direction and review, but final specification may require finish sign-off, confirmed quantities, centres, approvals or a Hardware Schedule.
Send the project before the hardware is fixed
Send drawings, elevations, schedules, door counts or finish questions when the hardware choice affects the specification, quotation, finish approval or made-to-order production route.
Hong Kong · Project & Drawing Review
Resolve the hardware specification before the joinery is drilled.
Hong Kong fitted interiors often require closer dimensional coordination because cabinet fronts, circulation space and storage layouts can be compact. Drawings allow projection, fixing depth, product scale and metric centres to be considered before hardware is ordered.
Made to Order in England
Project-Specific Metric Centres
Physical Finish Approval
Drawing & Schedule Review
Send the project information before every decision is final.
Capramont & Co supports interior designers, architects, joinery contractors, fit-out teams, procurement teams and project buyers working on apartments, penthouses, compact kitchens, wardrobes, dressing areas and fitted storage.
Include cabinetry elevations, narrow-front dimensions, fixing depth, projection restrictions, room lists and any existing-hole information relevant to the project.
- Cabinetry and joinery drawings or elevations
- Room names and door or drawer quantities
- Required metric fixing centres or existing hole spacing
- Appliance-panel dimensions where relevant
- Product shortlists or preferred hardware types
- Material, finish and client-approval notes
What the review is intended to resolve.
This route is especially useful where the physical scale of the hardware must be assessed carefully against compact cabinetry and limited projection space.
- Suitable product type and visual scale
- Fixing centres and project-specific dimensions
- Overall length, projection and practical clearance
- Appliance-pull requirements
- Material and finish approval route
- Whether the project should move into a Hardware Schedule
Hong Kong project decisions
Three areas to settle before made-to-order production.
Coordinate the hardware with the cabinetry
Narrow drawer fronts, shallow cabinetry and restricted clearances make projection, grip space, fixing depth and metric centre spacing particularly important during product review.
Approve material and finish deliberately
Humidity, frequent handling and room lighting can affect how a material or finish performs and appears. A physical finish reference provides a more controlled approval point before production.
Keep multi-room decisions in one record
Kitchens, wardrobes, bars and fitted storage can be coordinated within one Hardware Schedule to prevent dimensional or finish inconsistencies across compact multi-room interiors.
Review sequence
From drawing information to an approved hardware package.
Send drawings
Provide the available cabinetry information, even if the project is still developing.
Review dimensions
Confirm fixing centres, overall size, projection, appliance pulls and any custom requirements.
Approve the finish
Use a physical hardware reference where material, colour, patina or client approval needs confirmation.
Control the order
Move multi-room or repeated specifications into a Hardware Schedule before production.
Hong Kong environment and use
Humidity, frequent handling and room lighting can affect how a material or finish performs and appears. A physical finish reference provides a more controlled approval point before production.
Hong Kong delivery planning
Courier processing, import handling, recipient information, samples and phased project packages can be reviewed before final ordering.
Direct answers
Common project-review questions.
Can I send Capramont drawings before I have selected the final hardware?
Yes. Early elevations, room lists, quantities, cabinetry dimensions and finish references can be reviewed before the complete product specification is fixed. The review can help determine the most appropriate product, sample or Hardware Schedule route.
Can Capramont review non-standard metric fixing centres?
Yes. Project-specific metric fixing centres and other eligible custom dimensions can be reviewed against the joinery information before made-to-order production. Final manufacturing dimensions should be confirmed before cabinet doors and drawer fronts are drilled.
Can the material and finish be approved before the main order?
Yes. A physical finish sample can be used as the approval reference where material, colour, surface character or client sign-off needs to be confirmed before the wider hardware package is manufactured.
When should a Hong Kong project use a Hardware Schedule?
A Hardware Schedule is useful when the project covers multiple rooms, repeated products, different fixing centres, approved finishes, phased ordering or a project team that needs one controlled record of the hardware specification before production.
Send the Hong Kong project before product, finish and dimensional decisions are locked in.
Start with the drawings, room schedule or project information you already have. Capramont can then establish whether the next step should be dimensional review, a physical finish sample, product selection or a controlled Hardware Schedule.