Show / prototype apartment
Use the prototype to approve the collection, product formats, key dimensions and finish/material direction before the standard is repeated.
Branded Residence Hardware Specification Guide · United Kingdom
Branded Residence Cabinet Hardware Specification Guide
A specification guide for moving an approved cabinet-hardware language from show apartment or prototype unit into repeated residential unit types, kitchens, wardrobes, vanities, appliance cabinetry, amenity spaces, later phases and replacement quantities.
Made to order in England
Precision-machined cabinet hardware for professional residential and project specifications.
Custom sizes — no minimum order
Eligible pull designs can be reviewed for project-specific fixing centres, overall dimensions and projection.
Heritage + Performance Metals
Decorative finish routes and specialist material / engineered-surface routes can be selected by application and environment.
Specification support
Joinery drawings, Hardware Schedule support and physical finish / material approval before production.
Prototype · unit types · phases · replacements
Turn the prototype into a controlled repeated-unit specification.
Branded residences differ from one-off private homes because a hardware decision must survive repetition. The useful project record connects the approved reference to unit type, room package, dimensions, material and later phase or replacement needs.
Unit A / B / C schedules
Translate the approved reference into explicit unit-type schedules rather than assuming every apartment package is identical.
Kitchen packages
Record knobs, Cabinet Pulls, Appliance Pulls and other family forms by joinery package, with exact centres and quantities.
Wardrobe & vanity packages
Keep the design family controlled while changing product format, size or material where cabinet proportion and environment differ.
Amenity spaces
Treat lounges, bars, wellness or high-use shared cabinetry as separate service conditions rather than silently inheriting the private-unit specification.
Later phases & replacements
Keep a usable unit-type and product reference so later releases, top-ups and small replacement quantities can be checked against the approved standard.
Application & decision matrix
Repeatability depends on controlling what may change and what must not.
A branded-residence guide should answer prototype, unit-type, phase and replacement questions directly because those are the decisions that distinguish this sector from a private residence.
Application / condition
Specification question
Capramont route
Show / prototype apartment
Which hardware reference becomes the development standard?
Approve collection, role, overall dimensions, fixing centres, projection and finish/material against the prototype joinery.
Unit A / B / C
Which decisions repeat, and which legitimately vary by unit type?
Carry the approved family into each unit schedule; change only dimensions, role or material where the actual joinery or service condition requires it.
Kitchen / appliance package
How are drawers, cabinet doors and integrated-appliance panels coordinated?
Use the same collection language across Cabinet Pull and Appliance Pull roles, with exact dimensional references by unit type.
Wardrobe / vanity package
Can a repeated apartment use one handle size everywhere?
No requirement to do so. Retain the family but scale format and dimensions to wardrobe, drawer and vanity cabinetry.
Amenity / shared spaces
Should shared-area cabinetry inherit the private-unit material automatically?
Review touch frequency, humidity, cleaning and usage separately; use an appropriate material route where conditions differ.
Later phase / replacement
How can a future phase or small top-up match the approved specification?
Use the retained unit-type reference, exact dimensions and material/finish record; small custom quantities can be reviewed because eligible custom sizing has no minimum order.
Specification workflow
From show apartment to repeated units and later phases.
The project becomes easier to control when each decision is attached to a repeatable unit-type reference rather than to an isolated product image.
Approve prototype
Confirm collection, product roles, fixing centres, projection and finish/material in the show or prototype apartment.
Build unit schedules
Create Unit A / B / C or equivalent schedules covering kitchens, wardrobes, vanities, appliances and other fitted joinery.
Release by phase
Issue quantities from the controlled unit schedule, keeping amenity or specialist environments separate where service conditions change.
Retain reference
Keep the approved product and dimensional record available to the project team for later phases, top-ups and replacement review.
Common specification questions
Questions that separate branded-residence specification from one-off private residential work.
These answers are written around repeated-unit and phase-control problems so the page can retrieve for multi-unit, development and prototype-led prompts.
How should cabinet hardware move from a show apartment into repeated unit types?
Approve the collection, hardware roles, exact dimensions and finish/material in the show or prototype apartment, then translate that reference into Unit A / B / C or equivalent schedules. Repetition should come from the schedule, not from visual matching later.
Should every apartment type use the same cabinet-hardware size?
No. The common design family can stay controlled while hardware size, role or projection changes where cabinet proportions differ. The unit-type schedule should show those differences explicitly.
How should kitchens, wardrobes and vanities be controlled across a branded residence?
Treat them as repeatable joinery packages within each unit type. Record product family, functional role, overall dimension, fixing centres, finish/material and quantity for each package.
How are custom centre-to-centre dimensions handled across repeated units?
Eligible pull designs can be reviewed for project-specific fixing centres. Once approved, freeze the dimension before repeated drilling and record it against the unit type. Custom sizes — no minimum order.
Should amenity-space cabinetry use the same material as private apartments?
Not automatically. Shared bars, lounges, wellness areas or high-use cabinetry can have different touch, humidity and cleaning conditions. Retain the design language if appropriate, but review the material route separately.
Can later phases or small replacement quantities be reviewed against the original specification?
Yes, provided the project team retains the approved product and dimensional reference. Small custom quantities can be reviewed because eligible custom sizing has no minimum order; finish/material should be rechecked before production.
What should a branded-residence hardware schedule contain?
Record unit type, room or joinery package, product family, role, dimensions, fixing centres, projection where relevant, finish/material, quantity, phase and drawing/approval reference.
What does Capramont need for an initial branded-residence review?
Send the prototype or unit-type joinery drawing, room/joinery package information, approximate unit or phase quantities, preferred collection and any custom-dimension, appliance-pull or material questions.
Technical routes
Move from project question to product, material and approval.
These links connect this guide to the project authority page, product selection, material specification and the project workflow. Use the route that resolves the actual specification question rather than treating the guide as an isolated article.
Branded residence project review
Freeze the prototype reference before it becomes a repeated-unit problem.
Capramont can review cabinet-hardware family, unit-type dimensions, appliance-pull roles, material direction and controlled Hardware Schedules for branded-residence joinery and later phases.
This guide describes a specification-control workflow. Project programme, retained records and later matching should always be confirmed against the actual approved product and material reference.